Pretty sure they come with them but if not i will be sure to get them. Thanks!
Never mind. Found them on Krage Motorpsorts site. Mike
Does anyone know the specific part # or name for the banjo bolt? Even the correct size would be good. I am having a hard time finding those. Mike
They are drum brake hoses and I have an adapter to connect them to the caliper but it looks like a banjo style hose is necessary for the clearance...
So I have swapped them around and now have a new issue. There is not enough space between the caliper and knuckle to install the brake line. Do...
Ahhhh.. I see now what you are saying. There was no marking on the caliper to differentiate L from R. I will swap them around to get the bleeder...
Which pics are you talking about? Mine or Rixcj? His picture is upside down. Mike
So the support spring goes on top of the support key like in the pic and they both get driven in together? Looks like it will be a tight fit. Mike
Re: Disc Brake conversion now with pics and more ??? Hi all, Picked up the adapters and they work just fine. Need a little more help. As...
Thanks guys.
Any idea where to find said adapter?
Hi All, I am in the middle of converting a 73 CJ5 from front drums to discs. I have the complete front end out of a 79 CJ5. I am going to...
Small update. The jeep starts and idles nicely. In the past 2 or 3 weeks I have bought a new battery, new toyota starter, new fuel pump and new...
I did try 2. Must have been built by the same people. Thanks to all who responded and helped out. Mike
We installed a push button and toggle switch and voila. Works perfect. Starter doesn't drag on and it work like a charm. All the same wires in...
I have triple checked the conenctions. When my father in law and I test the switch without anything connected it seems to work fine. I have...
Here is a pic. So in all there is a wire from the battery to the "batt" on switch, a wire to the coil from the "I" position on the switch, a...
I'll try to have a go at this again today and get some pics. Mike
So I played around alittle more with this today. Got it turning over fine but it sounds like the starter is still engagin even though it appears...
Yes it was wired to the solenoid. I had 2 wires coming from it. One to the starter and the other to the coil. not sure why but it worked....
Separate names with a comma.