I put a new SW water coolant temperature gauge and sensor in my 56, and the temperature is reading way to high, pegging the gauge after just a few...
the frame on my 56/58 has a twist in it on both sides, right at the rear spring front hanger. The frame is straight except for the area just...
registered as a 58, but I suspect it's earlier, like a 55 or 56, based on some of the stuff I'm seeing. Anyway, I'm completely re-doing the...
My 56/58 (not sure the year, title says 58, but it has factory front shackle reversal so makes me think it's earlier?) is in need of new front...
I'm starting to think about the rollcage design for my CJ5, Most CJ cages have the A pillar bend and go straight down to the floor/frame infront...
I have an M38a1 grill on in my CJ5, and the wiring for the headlights is extremely poor, no insulation left and no good wire to splice into, so I...
Pulled the F134 from my CJ5, replacing some parts including the waterpump (it was cruuusty). As I removed the hoses from the bypass connection on...
I just picked up a fairly well banged up 58 CJ5 (or possibly a 56, it's registered as a 58 but from what I can tell looking at the serial number...
So, I'm in the early planning phase of a trip in my old Willys that will be at least 1/2 way across the US, and possibly all the way across from...
I had a local company make a set of custom springs made for my 46, they do ride noticeably softer than the superlift springs that were on there...
I'm thinking about switching out my Ross Box for a Saginaw. I've read plenty of manual saginaw threads already, but I still have a question,...
Time to make a spare tire mount! I didn't want to get into making a swing away carrier, because it would probably just rattle alot, and I don't...
Separate names with a comma.