What would be the most effective way to prime the oil pump on my '71 225 v6? I've recently had the heads machined and doing some engine...
yeah before i replaced the points/coil it was grounding out through the points... now there is spark just across the points (while i have the...
OK jeep got to where it wouldn't crank up so I replaced to coil, condenser, rotor, and put in a new set of points. the points gap is set to 0.016...
You can get a rebuilt alt. for relatively cheap. if you're going to spend the money on a 6-8000lb winch, why not spend another ~50 bucks on an...
Just 2 keys and a keychaine maglite. maybe that's the problem :-\ i purchased one from Orielly's (spelling?) today that looks to be made a...
Not sure how much of yours is broke off, but i had the same problem on my old trans case. just the end of the ear was broken off (still had the...
ok, in the last month I've gone through 2 or 3 of those cheapo $12 dash-mount ignition switches from AutoZone. Is there a heavy duty application...
What about the boomerang shackle design like I've seen on some wranglers. Any advantage to those over the H shackle on a cj?
Is lengthening the shackles going to affect the stability of the jeep?
I want to make my own "lift shackles" for my 71. I have all the materials but wanted to know what is the optimum length for shackles. Really I'd...
Welcome from Atlanta, GA!! Hey I have the same front bumper! :) but it will plow over some trees. not bushes.. TREES :twisted: :twisted:
problem solved. pressure switch was bad.. replaced and all is well.
It's not ON the mc.. inline with the hardlines. anyways yes 12v to one side and the other side goes to turn signal / flasher Then from turn...
would air in the lines prevent the pressure switch from working properly? because everything is hooked up but still no brake lights.
got it working, thanks fellas! now its REALLY time to go for a drive.. on the road >:D
ok, let me make sure i have this right. My running lights/turn signals all work. for the brake lights to work when the brake is applied...
I have the one that came off my 71. Worked when I took it off....
that thing is hideous
Might want to double check your ujoints. They might not be seated quite right... had that problem on my f150.
I purchased one about a year ago from Advance Auto Parts (manual choke), no complaints here.
Separate names with a comma.