The wheels of progress around my place have been turning pretty slow lately. I was able to get the sheet metal cut and bent to replace both...
Johns1967CJ5, I know it's hard to see in the pic of my Wagon body, the sawhorses have cable crossbraces on them. Also I think that if one was...
Great. Thanks guys.
Thanks everyone for your help and suggestions. I would love to build a rotisserie but I downsized from a 1200sq.ft. shop to a cramped two car...
Yes, your right. I'm located in Las Vegas, NV Steve
It's time to replace the floors on the CJ and I have read about how great Tommy rotisserie was. My concern is what do I do after I'm done with it....
Can someone tell me what the holes on my 68' windshield are for? I don't want to weld them up if they are stock and serve a purpose. There are two...
That's good to hear about the rotisserie. I'm going to give it a try for my tub. I look at a thread that Pielut posted about a home made...
Looking good. I've used POR15 and had great results. How did your redneck rotisserie workout for working with the frame? I'm getting ready to cut...
Welcome to the forum, Here is a pic of a Wagoneer D44 next to a 14 bolt. Not the best pic to show the difference but it's a huge difference...
I took some measurements of my CJ to help you with your build. These measurements are with the weight of the frame, engine,trans and tub on the...
tarry99, your inbox is full so I couldn't PM you. My problem is I get impatient. :( With my OA rig I can easily weld up a long flat and thin...
For most projects I will mig weld it. In this case where it's 18ga steel that is dead flat, about a 5' long weld and no way to get behind it to...
Here are the rest of the pic's for the windshield and also the dollies that I made. I still need to trim the vertical face of the inside (area...
tarry99, I couldn't cut up such a nice specimen of a hard top and doors. I have the top and door up for sale. I will be getting a bikini top for...
Here are some pic's of how I raked the windshield back. I guess that quality control took a smoke brake when these came down the line....
I sourced some D44's Narrow Trac's out of a 1976 Wagoneer, the fronts are flat top nuckles. I'm not sure what RMS is but the Wheel mounting...
They are right when they say build around your axles but you must look at the whole picture. For example. I have just built a 2x4 frame at 32" oc...
Thanks, it's a blast driving a piece of American history and awakening the eyes of the young and of the curious. Steve
I've been a contractor specializing in doors for a couple decades and we constantly deal with fire protection. Making a fire resistant box I think...
Separate names with a comma.