So I bit the bullet and bought one from Double D Fab https://www.doubledfab.com/ Not to expensive for what you get. They're all custom made to...
sent a PM
Would it be close enough?
Thanks. I will contact him
Looking for a manual or copy of one. Also need new stickers. Does anyone make them
It also pays to do a search. Found it's a power lock:beer:
Numbers are off the Power-Lok Sometimes it pays to look at the entire sheet you take notes on. Another brain fart P/N on diff 11 30 64 (Date of...
Didn't really think so, but worth a thought. What about a 2000 D44 Trac-Lok fitting in the 71 offset flanged axle? Amazing the junk (valuable...
2 piece differential still in a 67-69 tapered axle 44. 1/2 machined, 1/2 cast. It does have four spider gears. Numbers stamped into the machined...
Bottom line is if someone wants/needs a 360 core 1/2 rack of Irish Death :beer:, you pull and it's yours. Starter, alternator, power steering,...
It's a 360 with a T15 bolted to a spicer 18. Unable to turn the motor over by hand. I'll pull the plugs and see if I can get a wrench on the...
I'll check for those numbers on the motor and verify the trans. No past experience with AMC V8's. Most likely Sunday. Definitely a D18. Both axles...
Not sure I need to take a closer look at the transmission
I've got an odd fire 231 that needs a rebuild that I'd put in it. Original V6 mounts are still in place. They never completed the install. I think...
Here's a couple shots of the fenders. They do need some love. Whoever did them originally did a good job. Next question is the motor. It's a V8....
I picked up an early CJ5. No title, no history. MN and SN on VIN point to a 66 CJ5a. Hood is definitely M38a1. Grill has large turn signals....
Problem solved. Holley tech support responded it is a Holley 450 cfm Economizer which through research seems to have decent reviews. Any thoughts here
I picked up a Holley carburetor and Edelbrock Performer V6 intake manifold. The carb appears to have never had fuel in it. It is a single internal...
Ha, retirement and get time to work on your hobbies? I retired a year ago and haven't had a chance to touch my 66. It was going to be the first...
Will 4.3 throttle body work on the 225 odd fire? I've searched for a thread and I can't find one
Separate names with a comma.