Check out the links and forum at http://www.off-road.com/jeepster/ The site has gotten kinda stale, but there's still some useful info.
My 64 CJ5 has one vacuum wiper.
Looks like Avocado Mist metallic, but don't take my word for it. http://www.autocolorlibrary.com. I'm not sure if they have 1970.
Don't know if you solved your problem, but a friend gave me this link.http://smg.photobucket.com/albums/v295/scrambler013/Parts/
Sorry, the top and windshield are buried in my sister's barn. Boats for storage started coming in last month and it's behind several of them. As...
I have the same hardtop. The cutout on the underside above the windshield much smaller. It's just wide enough for the windshield, which does NOT...
Haven't used it personally, but another option is the Pro-T kit from http://www.haywireinc.com
Some more info. The factory trim rings are tough to find. I used some I got on ebay from the cripe distributing store. Just chromed steel, not...
Here's a what I've learned with these hubcaps. The red and gold fit the wheels with 3 "bumps" for hubcap mounting and the red and blue fit the...
Very nice job, for those less skilled and cheap like me, I screwed a couple of $.89 recessed can holders from C-Me marine to the floor . Another...
Not exactly hot rodding...http://www.film.queensu.ca/CJ3B/Tech/KamunenEngine.html
might be easier to swap bodies
I saw a kit released earlier this year. I thought it was Daystar, but it didn't show up on their product page. I'll try to remember. It was a...
When I took off my front bumper, I ground down the rivets and tried to use a punch. I think the flex in the frame took away some of the sting of...
Here's an option http://4wd.com/newsite/shop/productdetail.asp?pid=110973
I put the vintage look metal buckle type from JC Whitney in my 59 Impala. They might be what you're looking for. You could badge them by epoxying...
Phoenix auto graphics had them a while back, considerably cheaper than goldeneagledecals. Don't know if they're still available.
I used a small screwdriver after softening things up a bit with a droplight. Work against the button rather than the wheel. I did put a small...
Whitney sells Automotive Rebuilders Inc. carbs starting at $99.99. They're in the big catalog in the replacement parts section near the back,...
I bought one from JC Whitney a couple years ago. About $89.00 and no core exchange necessary. Works fine.
Separate names with a comma.