the thing with the spring on it looks to be new, i can only look at through the holes in the drum. it appears to just be a threaded rod with two...
I recently had my t-case overhauled and while they were at it i had the parking brake shoes relined(due to oil soakage). the shop reinstalled all...
after further investigation i found that the tin inspection cover was rubbing on the flywheel. i guess that was what those big washers were for....
i have a 1956 willys cj5 t90 trans. and 198 v6. after removing and then reinstalling transmission (due to broken clutch fork) there is a loud...
i broke the end where the cable hooks to, is removing the transmission the only way to replace it? the jeep is a 56 with a 198.
will a waterpump off a 225 work on a 198? my local parts house is having trouble locating one for a 198.
the engine was rebuilt about 10 years ago but has very low miles on it. it is usually only used during deer season and every now and then after...
any problems with changing oil weights throughout an engines life
tractor supply coming soon so i'm told
Re: hard stating L head i run 20w-50 oil because that is what the people who rebuilt the engine said to use. as far as the timing and valve...
Re: hard stating L head battery is in good shape
i got a 42 with the L head. it is still 6 volt and converting to 12 isn't an option. my problem is hard stating when cold. it usually starts great...
yes there is vacuum there all the time. my concern was if that vacuum would pull dirt/dust into the motor.
on the passenger side of the carb is the choke assembly and coming out the bottom of it is a threaded port that sucks air all the time. i have...
where does one get a FSM?
my cousin runs 32x11.50's on his 1970 with no lift and minimal rubbing on the springs. he also has 8 inch wide rims. in my opinion they look to...
I'm looking to smooth out the ride in my 56 cj5. I was wondering if anybody had any experience with the rancho rs9000x shocks(the 9 setting in cab...
my 42 willys is positive ground
dog collar, good idea!
anybody know where i can get the strap to hold the windshield down on my cj5? or a good alternative. looking to keep the hood from getting screwed...
Separate names with a comma.