Hi there, the harness for the tail lights, back up lights, and park lights are all splices . And want to build one . I am doing research and...
Hi been working on my 1971 dana 27 with 3.73 gears. Suspect it was replaced at sometime. The pinion spline count I have is 26 or 27 count....
Hi guys been working the '71 dana 27 front from my cj5 . Looks like somebody welded the drain plug shut on the diff housing. Looks like it was a...
Hello there , I am looking for and can't find any measurements for location and the proper position of the rear marker light . Also I am using a...
Hi everyone , finally got around to doing this . Thought I should share as I gained a lot of good info here. I included a link to a local jeep...
Hi I have done a bunch of research on what pedal should be on my jeep. I have the "Jeep logo on the pedal. Cannot find a picture of the backside...
Well Thought I 'd share this .. Was always curious if the T-90 brass synchro. would interchange with AD Saturn overdrive .. I had a grinding issue...
Hi guys I have been noticing some differences between the early and late 1971 cj5's. I have a June 71 jeep. I was looking at some web pictures...
I finally had some time to post info about my Jeep . I posted some pics at http://s1170.photobucket.com/albums/r531/sawilly/ 1. VIN #?...
Hi you all ,1st post here ... Bought a 1971 cj5 with factory T-18 and V-6.. with the spicer 18 transfer case .The cross member has tons on holes...
Hi you all ,1st post here ... Bought a 1971 cj5 with factory T-18 and V-6.. The cross member has tons on holes in it . The snubber doesn't line up...
Separate names with a comma.