I have just been given a safari windshield by a friend who had 2 of them. It is in fairly good shape, some minor rust spots, broken glass. This...
Can anyone tell me the year/model or other helpful info of the windshield frame I have om my jeep? The basic jeep is a 1953 M38A1, but I...
SM420/con-diesel (pictures added) I have recently acquired an NOS con-diesel SM420 which I would like to use in place of my current SM420. Is...
Anyone out there with a 5.3L in an M38A1?
I have a 3 1/8" D18 with a Warn OD. What modifications would be required to install the Tera-low 3.15 gears? Would/could the Advance Adapters...
I am planning a major rebuild/swap of my 1953 M38A1 this winter and have acquired the following: Buick 231 (even-fire), SM420, rebuilt Dana 18,...
I am building up a Buick 231 to swap into my M38A1, I have an Advance Adapters bell housing to mount an SM 420 and the adapter to mount my dana 18...
Any experience or opinions on using a Tri-C column in an M38A1? I am doing a saginaw conversion. Thanks, g
Does anyone have a picture of 68-75 CJ5, particularly hood and windshield? I am trying to determine where the hood latch and bumpers for the...
I would like to update the seats in my M38A1 to something a bit more comfortable, and safer - my wife just realized the pax seat is hinged and the...
I just swapped the stock windshield on my M38A1 for one from one of my parts jeeps. The latter has taller glass, wipers on the bottom, and the...
I picked up a 231 to put in my M38A1. No info on which model or year vehicle this engine came out of. I do have the following numbers: Block...
I hope I have those numbers correct. I am considering swapping the F-head in my 53 M38A1 for a V6. I have been reading about the various...
Which V6 is the easiest swap for the F134 in an M38A1? I am taking my 1953 M38A1 down to frame and adding the following: 2.5" lift BDS springs,...
How well does an engine driven pump (F-head, non military pump - no vacuum) pull fuel through an electric pump, for example - a Holly "red"?...
My local source thought he had one but it appears it is not so. Are these available from any vendors, or will I have to locate one from a private...
I am gathering the parts and pieces for my M38A1 overhaul. I would like to run 33" tires, it has 31" tires on stock 16" wheels and stock springs....
Putting a Dana 27A on my M38A1, it will have powr-lok and 5.38 gears. Are 10 spline warn hubs the correct ones? Thanks, g
I was planning to use these in my M38A1 - photos posted at: http://s1267.photobucket.com/albums/jj542/p38l5/front%20and%20rear%20ends/ They...
I posted some pictures of my Bantam trailer at: http://s1267.photobucket.com/albums/jj542/p38l5/Bantam%20Trailer/ No numbers or data plates...
Separate names with a comma.