This is a pretty old build. But thought id toss a few pics up. Started in 02. Sold it "uncompleted" in late 05. bought it back in worst shape...
Some of you may recall me from 8-10 years ago when I built my 4x4chevette. Anyhow I just recently bought it back and ran across an issue....
Since MY screw up I could only use one of the arms, and I ahve to keep the tie rod below the springs. other than that Myers Machine Shop did a...
Foudn the problem with the th400 when I tore her apart, every single one fo the foward clutches where welded together....
Well my rebuild kit came and ill be starting the rebuilt of the th400 tommorrow, any of you who ahve rebuilt them yourslefs ahve any special tips...
Any auto guru's out there can help me out? Ive got a th400 from a jeepster in the chevette, and it works in reverse, it has no drive or 2nd,...
With the 4wheel disc brakes the chevette master cylinder wouldnt push the jeep calipers, so I bought a 76-88 non power master cylinder for a cj5...
Hows the master cylinder on the cj5's wtih front disc mount? HAving trouble making the chevette cylinder push the jeep calipers.and dotn want to...
Just for referance, with out slight mods to a 225 4wd oil pan, it will not work on a 231 engine. [IMG] It appears as though it fits when...
Whats the deal... I bolte dit on, it fit good... I started engine... engine has a bottom end knock... shut if off, craw under and theres dents at...
Anyoen know what tranyn fluid a th400 from a jeepster should take... tpye A, or dextron?..... I thiknk dextron can replace type A and be...
Anyone in ohio know where to get headers custom made at?
Well, I'm running 4wheel disc now using jeep calipers in the front and metric GM calipers on the rear... master cylinder is from a chevette, and I...
What year vehicle and make came with a 231 that had vaccum advance evenfire distrib.
There was a thread about putting the front output on the rear, to eliminate rear break. What about putting the rear flange on the front, so I have...
Why is it that you cant use the narrow track 30 caliper mounts,rotors and calipers on the d27/d30 closed knuckles? I got a complete narrow track...
Ive decided to go with the hysteer. Here is my design, and rmyers will be makign ti for me. Bare with me its done in paint. [img] [img]...
Is the ujoint at the tace on the front a 1310 or 1350...? Or neither. The reason I ask is, with ym spring over and grinding,y my shaft barealy...
Yep thats right.... the internet pill I bought really works.. Got officaly started on the chevette rebuild today. The old welded...
Here I am asking MORE questions dealing with this stuff... And I cant find the answeres I nee dont he site or forums... Dana 18... im missing...
Separate names with a comma.