so those are both t90's? what's the gear ratio for reverse? reverse in the front and reverse in the back is a double low foward gear...
c'mon this is genius..... well I guess it would be genius if I can get it to work. gimme some time i'll figure it all out.... hah Rio
next time I talk to the father in law...I'll try to get him to read the vin off of it for me... thanks though lots of good info. Rio
sorry guys but no pics at this time... You'll all have to wait till after christmas... I know the suspense is killing me too. I'm...
I was thinking about this this morning.....well kinda. how does this sound. the quadratrac from jeep wagoneers had an optional low range...
I am currently working on my father-in-law, trying to get him to give me this old jeep he has sitting around. I'm pretty sure it's just a cj-5...
what's going on El Paso..... I think I saw it on the net, but not on TV.. I can't think off the top of my head where, but I'll look....
i can't take credit for this seeing as a buddy f mine came up with the idea.. he took an old water fire extinguisher...the kind that you just...
rather than swap out the shift rails which means tearing the entire thing apart.....I just used a grinder with a metal cut off wheel...and notched...
I took the twin stick off of a small hole 18 and swapped it to a big hole 18 I didn't even take it apart to switch out the shift rails... I'm...
I've just been offered a deal on a set of axles out of a m715. dana 70 rear and dana 60 front.. I was wondering if that would be overkill under my...
I was just offered a t98 and a np200 for 40 dollars each. I was just going to keep the np200 around for the heck of it. I was wondering how...
http://www.pirate4x4.com/forum/showthread.php?t=324151&highlight=heat+exchanger if you are set on a fresh water tank and possibly a heat...
I almost choked on a dorito when I scrolled down and saw the price on the poison spyder kit. screw that I'll make them myself thanks.. Rio
I have a welded dana 27. I read a few of the replys about better streetability that way. I run 31s and plan on going to 33s, if you have stock...
the syncros for a t86 are bigger than those for a t90. The cluster gears for the two have the gears cut the opposite of each other. I believe...
my t90 recently got stuck in 2nd... seems that the nut that holds the intermediat gear on in the t-case spun loose and was causing alittle slop...
fire up the torch and cut it. I doubt with the two cross members cutting a little tiny notch out of one of them is going to hurt anything.......
green, I have what I assume is a 3a, even though I think the dash was replaced w/ one out of a M38. It's on a cj-5 frame. I can take any...
could be one of those t-86's but I'm no expert Rio
Separate names with a comma.