Took my CJ in to the alignment shop because I was having a hell of a time keeping in between the ditches. They told me that the front of the frame...
I have read alot of previous posts about the Mojave or HeaterCraft brands of aftermarket heaters. I am wondering if they are worth it or not....
The PO of my 5 swapped a automatic column in. I am wondering if this is longer than the manual column? I think the auto came out of a 78'. I found...
Don't want to seem stupid but I am going to change the shackels and bushings on the 5 this weekend and wanted to know some tips or tricks as I...
Is the frame the same on a 7 as on a 5?
Would this be good for occasional use or should I just rent one from local parts...
Noticed that when I press on the clutch the brake lights come on :shock: Another bonus feature added by the PO R) R) R)
Just got the u-joints redone and was putting the shafts back in when I started wondering if there was a seal that goes on the inner driveshaft?...
When I went to take the spindle nuts off front axle they were barely on there hand tight. Is this normal? :? Doesn't seem right to me. :AMC:
What is the socket size for the front spindle nut on a dana 30 front axle? Need to go and buy one today the front axle u-joint broke the last time...
Seems that my 2bbl Weber carb is running rich and I can't seem to adjust it right. :? I am not real sure of what to do. Anybody have this problem...
Wanted some input on 4 or 5 point seatbelts? I sit awful close to steering wheel and want something to keep me off it in case of an accident. The...
Seem to have a slow draw on the battery that kills it if I don't drive for a few days. The guy I bought the 5 from has the electric choke for the...
The guy I bought this 5 off said it didn't have a lift on it but I think it does. The axles are out of a 78. The tires on it now are 31x10.5x15 on...
Does anyone know where I can find out more on the 2barrel weber carb? Seems to need some adjustments. The guy I bought the jeep from didnt seem to...
This sounds stupid but can anyone help out a newbie? I just drained the lube out of my transfer case and am not sure of the correct fill hole. The...
I have a 75 cj5 should I use sheet metal or aluminum for body work?
I Have A 75 Cj5 W/ I6 3spd W/dana 20 Rear And Dana 30 Front. Have A Header That Came With The Jeep Should I Put It On? Will It Help Out Much Or Is...
I have a 1975 cj5 w/I6. It has Amc 20 rear and dana 30 front( both out of a 78 ) I have a chattering noise coming from the transfer case or...
Separate names with a comma.