I think I'm going to stick with the T-15. I'm not sure if a lower first gear is worth all of the cost involved. I was hoping to maybe gain more...
I've searched the forum and read a lot but I still have some questions. I currently have a 1972 Jeep CJ5 w/ 304 V-8 and 3spd manual trans. I'm...
I also forgot to add that it has the stock shackles. Thanks guys in advance.
I just measured the height from the top of my front axle to the bottom of the frame, note it is a Dana 27 front axle. It measures 8 1/2" inches....
Yep that should work, The Jeep I picked up is a 69, the one with the lift. Thanks again, Mike
Anybody??? "chirp chirp" I hear crickets. I searched on the forum, found some topics, but nobody ever came up with a definitive or any type of...
I think my body is different height than stock, I think frame to ground measurement will be pretty safe, include tire size. Thanks,...
Hello All, I recently bought a Jeep and it appears to have a lift on it, I'm not sure of how much of a lift it has. I was wondering if someone...
I'm curious how tall is the arc on a 4" lift spring? I'm looking at possibly buying a set for my 72 CJ, 1 3/4" wide springs, just curious how to...
Hello from Michigan!!!!!!!! You'll like this site. I got on it awhile ago and I've been hooked ever since.
Well I went ahead and bought the Explorer Pro Comp 4 inch lift springs for a 76-86 CJ5. Now comes the fun part of installing them onto my 72 CJ5....
Hey everyone, I was playing with my jeep this morning and noticed something unusual. My leaf springs seem to be rearcing themselves, in the...
The whole body moves, the tub is rusted out. If you lift the steering wheel up and down you can make the windshield wobble and the tub is...
Hello all again, I found a tub from a 63 CJ5 that is in a lot better shape than my 72's tub, for example at 55 mph the wind pressure on my...
I found this link on ebay. I think this is what you're looking for. I don't know how hard it'd be to make or if it'd just be easier to buy it...
Hello all, again, I've got a 72 CJ5 w/ 304 V-8. I recently picked up a rebuilt 360 w/ headers for a CJ. The 304 runs great with no issues but...
Do you need longer driveshafts when doing an SOA??? How do you stop spring wrap also??? Sorry to infringe on post, but figured it could be useful.
Tim you're great. Anytime I've needed an answer you've had it. Thanks again. Right now all I see at auction is the knuckles and caliper...
Hello all, I have kind of an unusual question. I was searching on ebay and found a pair of knuckles and caliper brackets from a 1985 Jeep CJ7...
I attached a picture, It isn't like anything in the tech section on Cj5's. Its hard to describe, it does not bolt to the cj5 hinges.
Separate names with a comma.