I am installing a 304 v8 in a '72 renegade and would like to know which clutch linkage set up is better. The '72s from what I read used the cable...
I will try to keep this short & sweet. :roll: I picked up a rolling '72 renegade with a good body, frame and axles (D30 / D44) with no engine &...
I have a '72 intermediate tracloc 30 spline, 4.27 gearing, rear axle with a chipped tooth on one of the spider gears. Can I replace it with any...
I was reading the tech section today about the differences between a Dana 25 & Dana 27 front axle. I states that the 25 is weaker because it uses...
Happy 4th of July to all. I have been searching past threads for info about hydraulic clutch linkage for the 225 V6 linked to a SM 420...
Does anybody know if an input shaft from an early T-14, used with the Dauntless, can be installed in the later T-14's used with the I6 258? If...
I have a question about brake lines for my '70 CJ6 I am rebuilding. I am planning on having power brakes on this jeep and using a hanging pedal...
Does the VIN # of a jeep appear any where else on the jeep, such as the frame or body besides the VIN tag found on the firewall? The CJ5 in...
I am about ready to take my CJ-6 frame in for powder coating. I was wanting to know if there is anything I should do or be aware of to prepare...
I am installing a saginaw power steering box on my CJ-6 frame. I have mocked it up as seen in the attached pictures. I have mounted the box about...
Help! I need to seperate a D20 from the T-15 transmission. How are they connected internally? Do they have a nut like the D18 or do they slip...
I want to set my CJ6 with saginaw p/s and I want to know the best way to do it. The frame is bare right now. My 2 CJ-5 's have sagi steering but...
I am dinking around with my fuel gauge trying to get it to work / read correctly. I think I have the problem pinpointed to the sending unit but I...
I have a fresh 225 motor that I was saving for my Willys but now I want to drop it into the CJ-6 I just picked up (see Introductions). I have a...
I want to mount some auxillary lights on Roman's windshield and I have seen the mounts that attach to the windshield hinges. Have any of you made...
I have a friend who has just purchased a 1956 cj5. He has not even seen it yet. Is there anything particular to the 1956 model year that sets...
I'm putting my dash back together and I want to hook my gauge up correctly. The two gauge terminals are marked with a + and a - . I have a wire...
Has anyone ever wired their dash using some kind of a plug(s) so you could disconnect the dash wiring at one or two points when removing the dash?...
I am trying to decide on a set of headers for Roman and would like to put this up for input one more time. I have searched and read previous...
Are there serial numbers stamped on the frames of cj-2a's like on the 5'sand if so where do I find them? Been looking on my '46 but can't find...
Separate names with a comma.