boy a guy tries to make a freakin joke around here and the post gets deleted....thats messed up...time to find a non communist webpage....
yea, the ACC terminal will be hot in ACC and IGN. If your radio has a (possibly pink) wire for the station/clock memory, then it goes to the...
Well I had a set of 3/16"x2x3 angle ramps, about 3 or 4 ft long. Loaded a skid steer on the trailer and bent both of them.... Too heavy for...
so there is not a power brake option for the intermediate CJs? at least factory style fitment? I want to convert it, but its very difficult...
will a '84 brake booster (not sure what model donor) fit my '74 CJ-5? I am looking at adding power brakes since this is now my DD (everything...
on top would keep it cleaner, but access might be a problem. you dont want to be rooting in the dirt and mud after a trail ride to air them up.
are you going to install the on-board controller? if so, I'd put the connection nearest to the center of the Jeep, on the top side. no boot. If no...
you know that galvanized metal puts out very harmful fumes when welded, right? but it looks good so far!
my very first Jeep (1947 CJ-2A) went as fast as I wanted to push it. I know it hit 70 once in a while (yea I was in HS). Oh yea...
I rewired my very first jeep (1947 CJ-2A with a chevy 327 stuffed in) back in high school. NO electrical knowledge before, no 'father figure' to...
not exactly what you need, but it should point you in the right direction. I already had this in my photobucket account for another forum... BTW...
on the other hand, a lot of the DJ's had a dana 44 Factory limited slip in the back....(mine did) they are fun as a cut down dune runner buggy. I...
Re: Axel, and other questions. your not in 4wd with the hubs locked in, are you? sounds like gear bind (happens in 4wd on a hard surface that...
nice work! I SO want that PW fire truck! that thing is great!
Real nice Job! Sometimes I wish I could get around to tearing mine down for a treatment like that, but I am enjoying it too much right now...
LOL I am betting you have it in LOW RANGE...seen it before.... I have the same CJ you have ('74 CJ5 with 35x12.50.15 Swampers) and it has about...
My SoftRide suspension scares anyone that rides with me, it leans around the corners that bad. I've gotten used to it, and it works really well on...
I have no experience with that particular tranny, but I had a T-90 that would jump out of 2nd gear when the clutch was released. The syncro's were...
My Hedman Headers dont even come close to hitting the steering shaft. There is at least 1-3 inches of clearance all around the shaft. No body...
My guess would be a large guage wire from the POS terminal of the new battery to the unused terminal on the isolator. NEG side of the battery goes...
Separate names with a comma.