What are the differences in the distributors for L heads and F heads? I have an L head and a new cap I just bought does not quite fit, it is able...
I curious, has anyone tried an amc windshield frame on a pre-71?
Try Advance Adapters for the bearings/ bushings
Durabak is very possibly the best 'coating' product on the market. Used on Navy ship decks including aircraft carriers and on floors in high...
When, I take the valve cover off, i'll see if has the same wear as yours firepower. To set proper valve lash should I tighten the nut down...
Can you record a short movie clip with sound of your Fhead 134 and email it to me? JEEP59@gmail.com
ok I'll check that out. Thanks for ideas.
someone might have tightened them too tight if they are not suppose to be really loud.
This one seems noisy, but it may be normal. It sounds like the valves are closing hard. I may try to record a small video clip of it to let you...
Hey guys, are all F head 134s quite loud in the their valvetrain? I have never heard one before yesterday, and am wondering if F-heads make more...
For $50 you could be driving your Jeep while you save up for a CV if the presence of too much vibration calls for it. When you finally have enough...
I have access to a pair from a full size Dana 44. I havn't yet priced shoes and other parts, but if they will work on the 25 or 10 spline 44, they...
I'd like to know why 12" Jeep brakes are not as common of an upgrade as 11"? Are shoes, wheel cylinders, and other parts for the 12 inchers harder...
Separate names with a comma.