My 66 has vacum wipers on both sides.
What would the 16" x 6" steel wheels have come on? Like the ones on animal.
I had a 1971 Big Bad Orange Ren II when I first moved to Denver back in '91. Didn't know what I had at the time. Put a tailgate in it and...
Jason, What width rim are you running those on?
Well, heard from the owner of the trailer today. He says he has no plans for it, but he will probably just let it sit for another 10 years!...
I have found what seems to be an old military trailer that I am going to try to pick up. It has the 4 tie downs on the side, has the reflectors...
Had one of those on a '71 I had, it does mount to the cross member and it should have a backer behind each side. IIRC it used two bolts per side?...
These are the original wheels off a '55 3B.
Maybe I'm incorrect in the assumption that the wheels are KH. They have the smooth inners that have no provision for hub caps.
No, they look much narrower than 8". Maybe around 5" or so. They have tires on them so I cant get a good measurement right now. Interco's web...
i just came accross a set of 5 KH steel wheels (the same style as on ANIMAL), except they are 15". Is there a reason to go with 16" over the 15"?...
I ran a TH350 behind the 225 in a '71 I had, it worked great! You can get the TH350 with a uni-bolt pattern (both the Cevy and Buick pattern).
Just went and looked at a '55 yesterday, #20973, says "JEEP" on the side, "WILLYS" on the tailgate.
Just got off the phone with them. I just paid $4k for the Jeep (66' CJ 5), I'm insuring it for $5K. With $100K liability, the premium is $100 a...
Has anyone had experience insuring their Jeep with Grundy Woldwide? Just going with the agreed value because I hardly ever drive the Jeep.
Looking In The Tranny, Nothing Looks Real Bad. The Syncros Look A Little Rounded Along With The Edges Of The Gears. The Tranny Goes Into 1 St...
Using the schematic in the tech article, #23 in FIG. 208. Is that first gear?
Is first gear the one that slides on the shaft? My schematic doesn't show which is first gear.
OK, my tranny case is stamped t-86AA. From what I have read, it probably has the T-90 parts on the inside. So, if I have the main shaft with...
OK, I thought I had the T-90 in my 66 w/ a 225, but from what I have read it should be the T-86. I just can't get to the case to see what is...
Separate names with a comma.