I'd seen those pics but I had actually thought at a glance that they were steel lines, interesting. Nothing like that was on my setup.
I don't think I saw any vinyl fuel line in the run anywhere, just the steel and rubber. And definitely not the over the engine run, that was a...
Vinyl? Don't think I would even know what vinyl lines would look like, but I assume they're steel as they are some kind of metal for sure....
No problem. I seem to recall you having asked for any help on the return line routing a long time ago in fact. Had been meaning to get these...
[IMG] This is just inside the driver side door, the line nut is slide back so that the rubber hose could slip over the flare a good bit (not...
Sorry that old tank isn't in the Jeep at the moment, the line is currently hooked to a rubber hose going to a Hawaiian Punch jug if that's what...
Maybe I can save the trouble of someone needing to get a photo of an original tank without the locking ring. Mine is a '66, not a '67 though. My...
I took my old tank to the radiator shop to see if they could repair it. They didn't think so as the rusted through area was near the seam, but...
Yeah, the temp sender seems to have moved around even from 66 to 67, from what I've seen on here. Or possibly related to emissions packages, the...
Yeah the more I look into it, the more I probably will leave it stock, unless I run across a twin stick for super cheap on CL to salvage parts...
Yeah, I will try to get a pic of the one in my Jeep's floor, now that I found it. It is a very odd place to put it indeed. For people doing the...
After all the free research I do on their site I probably owe them a little business.
Haven't seen any bungie cords but maybe that purpose will be obvious when it's all back together. I'll keep those ideas in mind.
So yeah, after I took a closer look, the TC shifter is just flopping around through the hole in the floor. It was basically laying flat on the...
Good point, although it would probably be visible from the cab sticking through the floor? Don't remember seeing it but maybe it laid flat and...
Ok skid plate was actually the word I was looking for. And a lot of what you posted I had surmised in my wordier original post but edited out for...
Winch PTO. I think I've got all the parts I need for it. [IMG] One more Dana 18 pic. [IMG] I still have both yolks, and what looks to be...
So, after over 5 years I finally decided to dig into the back of the Jeep, where the PO had dumped most of the drivetrain when the transmission...
All right, I finally got around to testing the heads I got back from the shop. Using my home-made vacuum tester of course. When simply plugging...
My V6 spacer has some sort of emissions outlet on it, that runs to a filter of some sort on the driver side valve cover. The tube is part of the...
Separate names with a comma.