Does anyone have a picture or diagram on where to connect this on the bellhousing side? What size spring do I need? I am trying to install this...
I think you can order some from Rancho. I made some out of sway bar bushing.
After some reading, I have figured out that I will run a low pressure pump (2.5 psi) with a oil pressure switch and build a plate to cover the...
I am gathering parts/info for my 47 CJ-2A. I want to put a low pressure electric pump in place of stock mechanical fuel pump. I also have heard...
Ok, cool. I was under the impression that only open knuckle had the u-joints. My bendix shafts were threaded at the end and my new spicer...
Great information guys. Herme seems to have all the steering parts that I want. I had originally wanted that setup but did not want to hassle...
Ok, I haven't been here in a long while. I moved and my jeep has been shoved off to the side. I need help on a few things as I am going to try...
I found a couple Narrow trac Dana 30s with disc brakes. They are out of a 80 CJ-5 I am told. Gears are supposedly 3.54s. Does this sound right?...
! ahah Cool, sounds like that will let me run my 32s without a problem.
My Dad picked up some Rancho stock springs for my CJ-2A. Very good christmas present. Just wondering if anyone has these. I heard they ride...
Well I'll just check out the bearings and put a new seal on and call it good. It seemed to work fine on my CJ-2A. Made some whining but thats...
I am wondering if there is rebuild kit for a rear pto on a CJ-2A? Not really sure if it needs one but I wanna give it to my Dad and I don't want...
I'd run a tube. Lot of pressure on those tires and I bet your gonna have to deal with leak issues. I have some decent 7 series tires that I got...
So if I bought complete shafts for boths sides (inner&outer) with joints it would swap in fine?
Can I swap the Bendix shafts to regular u-joint shafts? Whats the difference.
I would post some pics of the jeeps and all the stuff I had but I need photoshop to resize them all! I still got some stuff that I would sell but...
I have a stencil sitting around, I think it came from sears back in the 70's. Actually I had a shed full of sears parts still in the boxes.
Separate names with a comma.