Here was today's project. It took more time to go to Lowes than it did to make it. 3 -10' lengths of 1/2" schedule 40, 6 T's and 6 45's. I have...
I would like to put a reliable top on the 416. The 2 obvious choices are a canvas military style cover, which I can get shipped for about $100 or...
http://www.tentrax.com/OffRoadAT_Trailer.html I think it would solve several issues. Storage and camping would be the top 2. What are your...
Please take a look at #5 in this photo. [img] Should I have this set-up on both the front and rear set of springs? The reason I ask is,...
Ok, I've decided to call Herm today and order a new T90 long shaft and D18. Here's my plan... 1) Remove Tranny cover from tub floor 2) Remove...
for an early CJ5. I can find them for a long nose, but not the short nose. Fabbing up a nice set is beyond my capability...:roll:
I don't see why they won't. They're just a different style, right?
I took off the old m/c because it is leaking badly and am planning on adding the dual chamber m/c kit from Herm. I have everything I need, but...
I am adding Herm's dual res m/c this weekend and the only real question I have for now is: Do I need to bench bleed the new m/c and if so, how...
Gonna rebuild the tranny and tcase finally. I would have ordered them from Herm, but I placed an order from him on December 9, 2005 for a remote...
I put the first scratches in the plastic windows this weekend :roll: I searched the forums and I think every thread ever started has the words...
It looks like I am going to buy a T90 / D18 combo from Herm. Here are the unaswered questions... 1) Do I want 26 or 29 tooth tcase? Why does...
Bushing is rusted in on both sides. Is there a trick to remove the bushings? Do I need new :insert name of part here: ?
How much do the shocks matter? I added the pro comp 2.5" lift to speedy and am about to order shocks. Do the big name shocks really make a...
Will these fit on my '56 with the dana 44? http://www.4wd.com/shop/productdetail.asp?productsku=4WD606&model=tj Thanks!
Ok guys, I need your creative sides here. I would like to make a windshield mount light bar similar to the ones available for the 76+ CJs....
Gentlemen- I have just purchased a new-to-me JEEP hauler. It has a steel deck. I have to build ramps for it, which is no problem. I am...
I broke the ball fitting at the tcase this weekend. I had the complete kit to repair (tube, ball fittings, spring, felt pads, etc). I replaced...
Can anyone tell me what size bolts to use to mount the original hitch back on speedy? I think there are a couple of sizes, but not sure... TIA
Have any of you guys purchased replacement springs from Krage. Way cheaper than buying the 0-1 Rancho set. Let me know how you like them...
Separate names with a comma.