Here is a thread I posted to do mine: http://www.earlycj5.com/forums/showthread.php?t=35868 Jim
Very cool! Thanks for sharing
There is a pretty good write-up here on what you need to do. http://www.cj-3a.com/installing_front_turn_signals.htm
OK, I didn't believe that they would be nut side out, so I checked my reference pictures from an unaltered mid 60's CJ-5 and it clearly shows nuts...
I've towed our pontoon boat several times with no problems, but I only move it a few miles. Jeep is a '50 CJ3A with 5.38's and the stock L134 [IMG]
Some things I noticed without researching a bunch... *No Jeep name stamped on side *Support brackets inside the rear fenders are completely...
This is the best example of the stock tail light set up I've come across. It was off a mid '60's CJ5 [IMG] [IMG] Jim
There are typically 3 or 4 places that are numbered that you can look up to find a year, but on yours there is likely only one place since it has...
I would think you could get that much variance just with different paint lots. It looks close enough to me. Jim
I found a spray can of Duplicolor on the shelf at Autozone that I used for my oil pan and was almost a perfect match to my valve covers. Of...
On my MB it is very easy to see the indents from the inside Jim
I have a set that I grabbed off an old tub, my spacer looked identical to the one above, but was rubber. I have no idea of the model year it came...
Just post a link to the ebay listing if it has pics. Jim
Look at the last two pics above. There is a clamp around the motor pivot that needs to be loosened (it's designed like a battery terminal...
My tub is a newer replacement that was done sometime in the past. Mine says "Jeep" too and not "JEEP" Jim
[IMG] Jim
I can't remember 100%, but I think the key sheared or broke, but only the hub fell off. I just remember how relieved I was when the tow truck...
In High School I was driving my '68 CJ6 (F134, D44 w/ 4.27 gears, 10-15 tires) and came to a stop sign. When I went to pull out into traffic the...
I'm pretty sure they are not interchangable since the L-Head has all 8 valves in the block and the F-Head has four valves in the block and four...
These pics in the Photo Archive show most of the differences in the M38A1's http://www.earlycj5.com/gallery2/v/picBank/album_015/album/ Jim
Separate names with a comma.