I would stat by saying this was put into jeeps around 1980. I am putting one in my cj2a but I am also using trans and transercase plus hanging...
NO , is correct for bolt on either way you go. I am using a 1970 tub,1980 firewall,1974 frame,1970 fenders and grill,1980 hood,and a mail jeep...
The body mounts are in different locations ,the 1980 uses a 2.5" rear leaf spring. the gas tank mounts differently. They also use different...
Another Idea Is to use 44's out of an older international they are about 60wms and if you must have a ford 9" rear, a 71 bronco has the 60wms ford...
Besides the line That is the same parts found on 1980 CJs. I am running one on my 70cj5 and one on my 47cj2a. I am using the hanging pedals off...
I should have the brake and clutch pedal , I went to hanging pedals. pay shipping and there yours. (located in cincinnati,ohio )...
As long as it is a d27 , I have one supose to have been out of 1971 it is a d30 though. fullwidth and narrow trac still uses the same...
I went to the saginaw steering gear box and hanging pedals ( cj )....
I have a 1970 cj-5 and the driver side has its rear marker light recessed and not the passenger side.Did they do this because of the side tire...
Im glad you figured That out it ,was just laying on the bottom when I opened it, sorry I could not help but I feel better I sent it just in...
I came across an adaptor plate.it mounts to my buick bellhousing but What engine would some one want to replace the V6 with ? It will not...
Why not use the dana 30 front end complete ? Shawn
4wd hardare sells them they are the same as 80's cj . so are the knobs that are pictured on the blue dash....
the doors on a 75 mount into the body and have snaps on the windsheild frame. 76 will have mounts on the body that the both drop down into. ( like...
Those are for 1/8 inch thick steel panel. I used the .025" ~.063" ones. I would check them out if I was you....
Yes I bought mine from mc master carr they have the best price and work perfect. I needed to replace fourteen of mine. I will look up the part #...
I have one in Cincinnati,Ohio It has all rust fixed in it,rewelded the seams put new body mount plates on and painted. It also has a custom made...
Separate names with a comma.