Hello Everyone, I was wondering if anyone here has put 11" brakes off of a CJ5 on a Willys pickup truck with a Dana 53 rear end/
Good Afternoon fellas, I rebuilt my D18 a short time ago and afterwords I noticed that when backing up my Jeep kinda pulsed. It was fine going...
I just picked up a TC-3 that's in decent condition considering the age but the right fender got trashed somewhere along the way. Do any of you...
My D18 ate the intermediate shaft bearings so I had to remove it for repair. When I took it off I found that the spud shaft from my SM420 was...
So I suddenly was having problems getting my oddfire in my 2A to start. I found that if I poured some gas down the carb, a 2G, that it started...
Hi Guys, Do any of you know if a Delco distributor part # 1110661 is odd or even fire?
I saw a WW II cold weather grill/radiator cover on ebay a year or so ago that fit an MB. Its canvas and snaps on in front of the grill to keep the...
So I bought a used full floating axle set for my narrow track 19 spline D44. I've read all the threads about these here and the stuff from Dr....
Does anyone here know where a guy can get new hat channel to replace the origionals under a 2A or 3A body?
Does anyone know how much a 225 weighs for shipping purposes? This is a long block with the starter, alternator and carb.
Re: Good example of a bad steering set-up This is off the subject but... it looks like your V6 has a dip-stick tube for your dipstick. I have two...
I have access to a complete power steering system from my son's rolled 92 XJ and I'd like to put it on my 2A. I already have a saginaw manual...
Separate names with a comma.