I have 362017 and 362023. Both Prairie gold Renegade 1's built October 1969
The forward "straps" share the body to frame hole. In other words it goes through the bracket- through the floor and into the frame.
Well I looked through the photos I had taken when pulling it apart and only could find this one of the rear. I do have the seats but they are not...
So I have had some time to compare the two side by side so to speak. The major difference I see is the axle gear ratio. The new one is 3.73 with...
It runs! Been a long time since I heard it running. Still need to do some tuning but will worry about that after I get it full assembled. The next...
Update, The wiring harness has been modified and completed to match the original and installed, just finished rebuilding the distributor. By the...
So I got to dig into the new R1 a little more this weekend. Found some good and some bad things. Trans and t case are definitely shot as the...
Warloch; You guys just have nice stuff out there, couldn't pass this one up. Zoomer; yeah it was too tempting, luckily the guy agreed to hold it...
Plans are to use the bits and pieces needed to make Gramp's R1 a 100% restoration then go through it and inventory what is there. Will re-assemble...
Monday Aug/10th Seattle Wa. The day started off like any other morning, checking EWillys and ECJ5 to see what is new. Looking in the...
Wow I can't believe it's been another year since I posted any progress. I have been busy on the Renegade in between side projects for clients. The...
Yeah it should be a V6 box but all the measurements i get off of the shaft show it to be a standard box. Easier to get parts I guess but a little...
So I got into the Ross steering box this weekend figuring i would probably need to fix the pins on the sector shaft and found this. [IMG] [IMG]...
No I didn't have the block "professionally" checked out but it ran fine and had good compression when I tore it down. My Dad and I have rebuilt a...
yeah wiring, that's one I've been wondering about. The wiring in mine is a mess! when I got it it would start by the key but not shut off without...
Wow! its been a while since i posted anything. Things have been progressing on the R1 in between side projects and work. had to do some floor...
Hey all,I'm also in Washington.I inherited my grandfathers R1 that he bought at Sid's jeep in Issaquah in 70.s/n 830501 7362017 mostly complete...
HERES HOW I GOT IT http://www.earlycj5.com/forums/attachment.php?attachmentid=28455&d=1312560382...
[IMG]RH REAR TAIL PANEL [IMG]LH REAR TAIL PANEL...
[IMG]HOW BOUT WE TRY THIS LOCATION FOR PHOTOS, SORRY GUYS NEWBIE
Separate names with a comma.