Love the tan and black paint scheme. I think the tire height is close to 31 inches. I was trying to replicate the wheel well volume that the 16"...
I think the heavy flywheel helps a lot.
Hot air turbo sits easily under the hood in the factory position(inserted in the intake) I am talking about hot air regal version. There was a...
Still having tech problems with attaching photos.
Used the factory rail and upgraded to green stripe (30 lb.) injectors bought used. Had em flowed and balanced. No problems. The V6 fuel return...
My hot air sits in front of a T 86 a. Mechanically the switch is easy. Turbo motor fits like a glove. Heavy odd fire flywheel bolts right up...
Can you feel any difference in the vibation transmitted through the shifter cane when the motor is running and clutch is depressed and released?...
aa chain set up has worked great for me for 16 yrs.
I did receive one of the cart bearings. Seal looks to be well bonded to bearing cup. Based upon my poll numbers, it doesn't appear that there is...
Synthetic grease is another reason I think this "upgrade" is doable. Unless I am mistaken, the 27a axle is basically the 25 axle or its precursor...
I have yet to hear back from the vendor. As I understand this product, thevendor buys a bearing and then through a proprietary process bonds the...
Gotcha. I figure if you pack em like a wheel bearing, then the grease will follow the rollers. AFIK these bearings never turn a full revolution...
I appreciate everyones' input. Thanks guys. I believe the large brass collar on the spindle maybe smaller than what I assumed. Service manual...
I suppose the spindle bushing could be machined to accept a sealed ball bearing....bearing or Teflon? sleeve as there is no axial load, but then...
Nick, I truly appreciate your feedback and critique. I did not think the spindle bushing would be an issue but I don't think I have pushed the...
My point exactly. Trying to improve the moustrap here.
P atrick, I found those pcx when I was searching. I tip my hat to your Dad. That is some impressive work. I don't think I can fix my leak...
What would you suggest? Mill the bushing and install agrease seal?
Nick. I think a coating of good Quality grease where the axle rides in the bushing would be sufficient. The only time I have ever had lube...
Separate names with a comma.