https://www.facebook.com/marketplace/item/1107388816966129/?ref=product_details&referral_code=marketplace_top_picks&referral_story_type=top_picks...
In this modern age would the 3 pt. hitches offered for farm jeeps be considered series 0, 1, 2 or something heftier?
So I suspect I smoked something in the charging circuit last fall, could be the regulator or it could be the armature. It's probably the...
Way way back in time I built a bracket to fit a jerry can holder on the tailgate. Unfortunately soon after that Tonk had an accident & the...
Something for you to check if your Solex isn't perforning well- [MEDIA]
I have an issue with Tonka's running rich and it's been getting worse; in fact I can now start & idle with the the throttle completely closed...
Looking for a genny pulley, mine has somehow hollowed out it's bore & keeps wobbling on the shaft :( Let me know if you got something.
[MEDIA]
I don't agree with a lot of the theory but the results seem hopeful. [MEDIA]
So one day back in the spring I started Tonk up I had a godawful screeching noise coming out of the engine bay someplace o_O I popped the hood up...
My lathe has come in very handy over the years but it has had a few drawbacks: - Threading requires a lot of time spent finding change gears,...
Seeing a 7.8 compression ratio F4 head in the classifieds got me thinking- What's the exact difference between this & the standard head? Is there...
Using electric steering assist is a question that comes up every now & then, I know it's been done but here's a couple of examples from the CJ2A...
Can any one tell me the housing diameter on a Naco tail light? Depth would be nice too :)
There used to be on one of the the yahoo trailer groups plans for canvas top hoops that were used on the civvy models, anybody got these saved...
My poor little Iltis trailer has been suffering from living by the sea :( The springs & tongues are in pretty bad shape so it's time for a fix up...
Introduction- [MEDIA] As Tonka gets older (or maybe it's me) I'm finding the effort required to crank the big'ole'bus wheel in stopped or low...
Due to an ongoing project I found I had a pressing need for this- [ATTACH] [ATTACH] [MEDIA]
If I could have found one to buy I sure would have. But I couldn't :( [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Anyone got the TRW p/n for the stock sized left hand thread tierod end?
Separate names with a comma.