Thanks Howard.....Very helpful....Cheers
It was mentioned on a old post on this site & two different sites from Australian off-road trailer builders that I came across. It strikes me that...
Torsion axles have the advantage of lots of ground clearance on a trailer. but I understand they are not recommended for off-road use. Can anyone...
Recently began installing Herm's dual master conversion kit c/w banjo bolts. I have concerns about the minimal clearance I can get between the...
I'm in the process of a front and rear 11" brake swap on my '66 in addition to a new dual master from "Herm". There was no Proportioning Valve in...
Thanks all
Has anyone made a tool or have suggestions for removing the old oil seal on the rear output shaft on a model 18 transfercase? Both my manuals...
I did a forum search and found many great rear tire carriers both fabbed and bought, but none seem to allow room for a pintle hook mounted in it's...
I'll be replacing the high backed after market seats that the PO put in my 66 and being the thrifty Scotsman that I am, I was wondering what...
Can anyone put a year on this comando I found on the weekend. I couldn't get too close to it but I think it may be available cheap. Thanx as always
Welcome from Eastern Onatrio, Canada. You'll find lots of sage advice on this fine site. Good luck getting it goin'
I've never found a satisfactory answer as to whether my assembled in Canada 1966 is a Willys or Kaiser universal ECJ. My title sez Willys but the...
This is all good advice especially with regards to stopping safely. Makes sense to do the upgade now even if I was feeling a little Dutch just...
Is there an easy way to determine the life left in stock 9" drums? My FSM sez " Do not remove more than .030" thickness of metal". But there is no...
My Windsor Ontario built 66 also originally came with a V6 according to the VIN #
It's full of sumthin'!
Thanks for all the info Guys...could some one tell me a little more about front shackle reversal?
I have a chance to aquire a good M38-A1 frame and I was once told that they are a little more substantial than a standard CJ-5 frame. Does...
Good Score!!
Thanks...I should have known that..This just makes me realize once more what a Frankenstein my CJ really is....Cheers
Separate names with a comma.