I'm helping a friend with a 73 project. The install involves a 4" lift from Hell Creek Suspensions. They ask for "shackle bolt Dia." for the front...
Does anyone know how to turn the interior lights on in a JK Wrangler? Besides opening the doors............:roll:
I found this T18/D20 combo in NJ for $500. I'll be putting it in my '75 CJ with the 360. These two pics are all that I have right now. Its 5 hrs...
I am about to put my new soft top on my '75 with the fiberglass tub. I would like to see how other folks installed the one piece doors....
My Tiger Top came in last week and we installed it on Sunday. Pretty straight forward instructions. The screws that they provide with the snaps...
If I have a 21 degree driveshaft angle with 2 degree shims, is there a way to determine the angle when changing to 6 degree shims before I...
Here's the result of a nearly 7 year build. All we lack is a console and a stereo system........(poser shot):roll:
Can someone with a v6 commando please send me a pic of the radiator??? And, the measurements would be great too!!!:D TIA Colin
I test drove the rig for the first time on Saturday and I all most brought it home on a wrecker!!! The body roll was so bad that I thought I would...
The CJ5 fuseblock is in a location that is quite inaccessable by the more "round" types like me. During my build, I realized this and thought...
I have had my '75 disassembled for so long that I can't remember where the clutch return spring is supposed to go. All of the drawings I have...
Was there a Jeep model that was sold with 15x8 Kelsey-Hayes steel wheels as original equipment? I bought a 71 CJ5 from PA that had them on it and...
An L-head engine will not run with cylinder compression readings of 50 psi avg.
I'm in the process of installing a 6 point cage in my '71 CJ5. It was in another CJ and I bought it to use in my off road rig. I fits well in the...
Has anyone had a problem with a T90 locking up in 2 gears simultaniously?? The Jeep I bought in PA this week end will not roll without the rear...
I'm considering high temp paint for my cast iron manifolds and was thinking that a pre-heat in an oven would help with the paint bonding. Has...
in the '75 CJ5 dash over the steering column?? It's a factory hole with the notch on the bottom between the HL swich and the Hazard switch. The PO...
Has anyone had any issues with the fiberglass fenders from them?? I'm sweating over a possible problem with them being out of square where they...
I'm installing my new e-brake cables and can't remember where the bracket mounts to the crossmember. A pic of the area where the front and rear...
I am advising my B-I-L to change to the 1 wire alternator from the generator on his '65 CJ5. This will eliminate the need for the voltage...
Separate names with a comma.