Before you pull the 6cyl, mark the wires that go to the dist, alt, starter solenoid..etc. if necessary put a volt meter on em to find the hot...
Gasket with a light film of black rtv in both sides. Works every time. Posted via Mobile Device
Thanks for the info! Posted via Mobile Device
Got a little done today Propane junk mounted [img] Radiator hoses on [img] Ride height [img] Had to notch the frame for the springs at...
Those headers are ebay specials, as far as I can tell they are the same. Very nice quality 8) A little progress Got the radiator brackets in.....
Shiny means faster and more horsepower right :D [IMG]
Dan I looked into this pretty hard a while back, the best solution I found was add 3-6 in the door and the center of the rear wheel well. Also...
Haha I guess they are dual purpose then :) Posted via Mobile Device
Managed to get started on the propane tank hold downs yesterday... [img] [img] [img] [img]
Its for when I get scared and want to back up real fast :) Yup I do have a small garage that im insecure about :( And I think you'd be...
Borrowed some 46s from a buddy to see what it'd look like with them.....i think I like them :D Now I gotta find a decent set somewhere to buy.....
NDTs are terrible....just watch the video :) about 5mins in http://www.youtube.com/watch?v=lzMGgvPxEls
Are you using the cloth seals or a new style rubber? Posted via Mobile Device
Headers and mini starter on [IMG] [IMG] And the steering box :) [IMG]
clamps like this right? ;) http://www.fastenal.com/web/products/detail.ex?sku=0216765&ucst=t
I just learned it about a week ago when I was researching for my fuel system on the TJ :rotflmao:
Moar parts :) Hopefully the headers will be here tomorrow so I can get those put on and make sure everything is gonna clear. And if the...
I think you lost most people in your first sentence...Your talking about the nuts welded in the frame for that the skid plate bolts up to correct?
For fuel I'd stick with 3/8 if possible. Brakes 3/16. If you use AN hoses all the number means is x/16. So if you have a -8 hose it would...
You need a 45deg double flare for the brake lines, and a 37 if you use any AN fittings on your fuel lines.
Separate names with a comma.