I have some original 60/40 seats in my JEEP currently. I don't like the coil and spring suspension as it can bounce me pretty good on the trail....
any reason to go with one of these versus the other? Both of these are greaseable stock length I think, but the 2nd is twice the price edit:...
Just found this link on an ebay add. It must be the same guy in the Netherlands that is on the G, but I had never seen his site. Looks like he...
When reassembling my rear drivers side brake last night, the axle shaft would not go in far enough to allow the bearing/race to go in completely:...
This is a pic of my home-made shocks mounts installed. A more detailed pic is in this thread, before they were welded in:...
So, yesterday my JEEP decided that my pant leg was too clean and proceeded to start leaking oil. It has never leaked a drop, but this came on...
Anyone out there bought a reman 2G? Any complaints? Napa lists two (one with auto and one with manual choke) for ~$215 each if searching by a...
will the MSD 6446 work on my 225?
My JEEP has a cold. On cold days the heater, signals, fuel gauge, windshield wipers, and radio do not work...until the JEEP is warm. This can be...
What is required to replace the outer pinion bearing on my rear axle? How easy/how long does it take?
Woohoo....after going to 4 different graphics/sign/printing companies today that can not do the work, I was finally directed to a 5th place that...
Hey Boyink..and anyone else. Do you have pictures/specs on upper shock mount brackets I could add to my Bantam so that I can install shocks? I...
I searched the Bantam Trailer group page and for some reason could not find a concrete answer. What axle model can I search under to find...
Well, my wheels are off at the sandblaster/ powder coater for the next week, so I am now thinking about tire size. I noticed Boyink used...
I would appreciate it if people could post pics showing how their tailgates are attached. I am trying to think of some simple (and clean) way to...
The gate on my new trailer is in good cosmetic shape, but is twisted to where one side is touching the bed while the other side is 2-3" away....
But i like it........
I would like to replace my factory draw bar with something that gives a little more clearance and has a 2" receiver. I know many have just made...
I have browsed through the old posts, but none of tme really described my problem (at least the way I would). FYI: i just rebuilt and installed a...
My new LuK TO bearing has a metal rod in the slot where the fork slips in. Does this rod go inside of the fork or on the outside? Does it...
Separate names with a comma.