yep, oil is leaking from intake between the manifold and the block at the back, cant get a camera in there. I used oil dye so it is very easy to...
I had a large amount of oil leaking from the back of my freshly re-built 225 V6 (1968) where the block and the intake manifold meet. I am using an...
I searched the frums and all I saw was a re-direct telling me the forum was compromised? What now?
I forgot on this. When timing a v6 with HEI should it be done with the vaccum advance disconnected or connected?
Took the valve covers off my 231 odd fire. The rockere arms are dry and when I fire up the engine, no oil anywhere. It is making a rapping noise...
I didnt do the rebuild, a local mechanic did. He seemed kinda miffed at what the problem could be. I will ask him. It sounds like only one lifter,...
just did a 231 odd fire swap for my worn out 225. having a problem with lifter noise. It sounds like only one lifter is knocking bad when there is...
Hey David, whats up. I dont get on this website much, heres my email aaronbuckel@sbcglobal.net
I am putting a 231 odd fire into my 68. Cant seem to make the main crank bearing fit. I was told the large main thrust bearing goes on the second...
Hi David, yes I'm still around, just dont get on this website enough. aaronbuckel@sbcglobal.net
I am having my V6 rebuilt. I was running hotter plugs because I was burning so much oil. Now that everything will be fresh, what spark plugs...
My friend has had it on his for years, only problem is it;s very hard to get it off again. Yes, I coated all sides of the gasket and it was gasket...
I fixed it. After using every sealant I know of, a friend suggested 3M Plastic and emblem adhesive, it worked freat. It was a bad leak, left about...
I have a leaking T case lower cover. I have replaced the gasket with sealant, w/o sealent, Red sealent, blue, black and still get leaks. The cover...
What happened to Matkins frames? can't find them on the net.
I am considering either a rebuild of my D27 or a swap to a 30 with Disc brakes. Question is, will I have to run a booster to power the brakes or...
I don't want to tackle an engine rebuild nyself. Does anyone know of a good engine rebuilder in the San Diego area that has experience with the...
Is that a power brake diaphram?
I found them at jeep4x4center.com
The problem with those cheep radiators is that they are basically glued together and meant for a couple seasons racing due to crashes etc. I went...
Separate names with a comma.