Due to another post i started this thread for jeeper friends who can't get their hands to US car parts for brake conversion. I used brake...
Hi. After the lift i did in an m38a1 with yj springs, when i turn on sharp corners i have increased body roll. Has anyone add a sway bar on the...
when i start moving either in first or reverse i can hear the rear right axleshaft spin and stops on the hub key. I took apart the hub cleaned...
Hi all! i have finished the disc brake conversion on a d25 axle. Also i replaced the stock pedals and master cylinder with hanging pedals and...
Hi all! I'm putting front disc brakes to my m38a1 from vitara parts. The question is what is that metal thing to the side of the pads for,...
Hi all! i just finished rebuilding a d18 tcase and put it back on. I took off the jeep for a test drive and i noticed that i wasn't happy at all....
Hi all! I was searching with no luck, for the master cylinder bore size of an m38a1. I want to modify those oem pedals with hanging pedals and...
Ok i i'm looking to find out how it's called the "windshield wiper fluid exit" that's how my sister in law called them. Because i live in Greece...
Hi all! is there lower ring and pinion set, like 5.88, for m38a1? I think i had read it somewhere over the net but i can't find something now....
-------------------------------------------------------------------------------- Hi! Long time ago i was thinking about a lift. After the new...
Hi! Does anyone have a picture jpg,pdf whatever with the dimensions of an m38a1/ '58 frame I have steering problem that is getting worse and i...
Hi! i was searching to find a double cardan cv all around the internet. All the information i could find ended up at tom woods driveshafts and...
Hi. the last 3 or 4 days when i release the clutch slightly and the jeep starts to move i hear a sound from the bellhousing area like something...
I am allmost ready to install yj springs on my m38a1. My question is if i have to widen the spring pads for the wider springs, or it's ok to...
Hi! i'm searching on the net to find the lower bronze part that goes into the brake shoe that looks like a washer, for an m38a1. i don't know...
Hi all and happy new year from Greece. I would like to change the stock springs of an m38a1 with yj stock springs. Because i'm going to make...
Hi to all. i'm back to start work with my m.. I want to convert the stock springs with yj's. I think it's easy conversion to do. The issue is that...
http://www.to4x4.gr/html/site/forum/viewtopic.php?t=2814 this is the link from a greek forum where a friend of mine has fabricated a locker for...
Hi can someone tell me what the parking brake drum diameter is.
HI all. The problem with the steering is that it has the tendency to turn right. I had check a few things as rod ends, steering box, shaft etc and...
Separate names with a comma.