Got the bed picked off, because none of the sending units or fuel pumps are working, so I can change them out, and lo and behold. The front tank,...
Ok, so I'm in the midst of getting everything setup to do my saginaw swap, and got the aluminium bit of the "High Mount" power steering bracket...
Ok, so on my '70, I have the single wiper motor setup, mounted externally with a nifty chrome cover, and the transmission to the wipers...
Ok, so one of the PO's on my Jeep added what I've determined to be a Rough Country Lift to my CJ, near as I can tell, and I'm not sure, it's...
So a few days ago, I was listening to the cooling fan on my dauntless just huffing away (I'm assuming it's the original, it's an Asymmetrical...
So I'm actually *at* the junkyard, and just need to know if the P/s pump bracket off the big bucks, like the 430cid will work on a dauntless...
I just want to check that I'm not crazy, before I go ordering replacement U-Bolts for the front axle. I apparently wasn't *really* paying...
So in conjunction with doing the Disc Brake Upgrade on my D27, I'm also planning ahead a bit for the future, in that I know I'll be tossing a...
Ok, so I've been through my FSM, and haven't been able to answer these two questions, and also done various searches here, and just generally...
So I've got one of the summit/mojave (honestly, can't remember which it is) in my Jeep, and obviously, ducting to the defroster is no big deal,...
So I'm finally in a place where I'm getting ready to do the Chevy Disc Front/11" Drum rear conversion on my '70 CJ5. I did some...
Just picked up a SM465 and NP205 off of CL for $175, any major issues I should watch out for when I tear it apart? Going to order the Novak...
Here's some pictures of it.......
Anybody know what it is? I did a search here on the forum, and have been to all the usual sources (napa, rockauto, summit, jegs) and have come...
So after some diagnosis, the oil pump in my replacement engine is pretty weak, so I ordered up a pump kit from Summit, and I'm going to install it...
On the 225 that's going back into my CJ, I've got a set of the Offy Finned Valve covers. Unfortunately, I'm not near the Jeep at the moment,...
So I did some searching, and either my search-fu is weak, or somethings buggy with the search function on the forum.... I had my replacement...
So I got some measuring and figuring done on the Dauntless out of my CJ5, and it is savable with a .080" Overbore, which by all accounts is well...
Ok, so I've spent the last couple days googling whenever I have a chance, and I can't seem to find anybody that can tell me how far you can...
I've got a 70 CJ5 with the stock Dana 27 Front/Dana 44 rear, mine came with 3.73's, but I've added some rather taller tires to it (Appx 33") and...
Separate names with a comma.