I have WAY too much time on my hands... I track the miles driven on all my automobiles, and hours on my tractor and generator(s). So,...
My hose from the air cleaner to carb finally gave up the ghost. Since replacement hoses are of such poor quality I'm going to replace the cleaner...
Anyone have a part number for an electric fuel pump that'll work on a F-134 with the stock YF carb? PSI of output??? kamel
Vent windshield gasket tips. There are two types of vent w/s seals out there that I know of -- Original NOS and reproduction -- available on...
It took a couple of hours, but was finally able to get around 15 inches of seal installed. I'm not sure what the trick is quite yet, but thus...
The glass shop is having a problem with this... Does anyone know what gasket will fit inside the groove of the inner frame to hold the glass in...
I never bothered to take the paint off of the toolbox mounted passenger seat hinges in the past, but I did today, and lo and behold they are...
I'm looking to put in new seats in the '66 cj5. I've got the factory mounts... Seems as if most vendors have only black seats available. I...
I'm looking to put an electric fan on the radiator and eliminate the engine mounted fan. Any brands to stay away from or any brands that are...
I was connecting the heater hoses today on an F-134 and I found that the rear inlet was pointing straight down. It was a Harrison heater core...
I'm geting ready to take the vent w/s to the glass shop to have glass intalled. Does anyone have the dimensions or a template for the glass? I...
Putting together a jeep and came to the wiring harness. Just a piece of advice regarding wiring harnesses... Aside from a fire -- wiring...
I've several tuxedo park emblems... The chrome is OK, but the lettering is faded. Looking for a clever way to renew the black inset on a chrome...
The clutch control rod and cable were different from the 8.5 inch hardware.... I am looking for the lengths of the clutch control cable and...
Did they make a M416 or similar trailer that would tilt? Has anyone ever made or seen a dumping m416?
The v-6 emblem has four colors --- gold orange white black Does anyone know what those color codes are or the 'official' color names are?...
I've got the tux park hood emblems all polished up nice, and they look as good as they are 'gonna' get. Now, I need to paint the inserts on...
I was at an auction yesterday, and there was a 35 Ford for sale. Seller wanted way too much for it, so it didn't sell and the auctioneer went...
Does anyone know of a source for lettering that could be put on a speedo (fuel and temp), or a heater control? Got a couple of nice items, but...
If you look at the passengers side and measure 9 inches aft from the upper shock mount you will see two threaded holes in the side of the frame....
Separate names with a comma.