If you have a heavy duty hub puller, and it still doesn't budge you may have to heat the hub/drum to get it to pop free. To pull mine, I torqued...
I finally got a chance to get my rig up to the trails, the new throttle return spring has practically eliminated the throttle surging when...
My jeep was doing something similar just a few weeks ago. I replaced both of the battery cables and its been 100% better since. You may want to...
Nice! I think I'll need to do something like that too. Not even because of the throttle problem, just because using the toe to work the throttle...
This sounds an awful lot like a gigantic thread I saw from a year or so ago. Must have had over a hundred posts in it, with all kinds of...
Yeah, I have definitely considered this, but I've rebuilt this carb twice in the last two months. First was from 13+ years of sitting, second was...
Well, I've swapped the return spring out with a much heavier replacement... Pedal feel still seems acceptable, I thought the original feel was a...
Yeah, that was my first assumption as well. I'll try a heavier spring to see if it helps out, I think my spring may not be correct. When yours...
I'm sure its not my foot hitting the gas, as it happens even when I'm fully clear of the peddle and on the brakes. My jeep is fairly stock, but I...
I took my '5 out to the hills to play this weekend. (Finally! After 150+ hours of labor, and and a large sum of money I haven't tried to keep...
Mine was a 1 7/16 for sure... Had to borrow a wrench to pull them.
I'd just like to say thanks for this comment... I just ran into this thread's exact same problem when I finally took my jeep for a test run...
I had this exact same problem with my jeep a few weeks ago... I got my engine unseized with a liberal application of seafoam deep creep down all...
I've recently come across a Koenig 100 PTO winch, (base mounted, not that it matters much) and I'm seriously considering mounting a hydraulic...
Looks like you're not the first person to run into this problem... Check out this thread.....
You may need to double check the wiring in case the prongs connect to different locations than on your stock unit. Make sure that your +12V in...
Your local auto parts store should have a three prong "Electronic" flasher that will fix this problem quite easily and cheaply. The three...
I'm sure this is probably a commonly used trick that I've just never heard of... But since it was new to me, I figured it could use a bit more...
There are some good technical docs on the main earlycj5.com site before you get to the forum... I think these are the two that will cover what you...
Separate names with a comma.