need to make the cap for the motor, missing mine. its the deal that has the armature reversing brake inside. Need to know the inside diameter of...
as noted, I need to see how a tiger top - top hinge mounts on a 2A. the instructions are shady at best.
need to know a soft top dimension before I mount these seats - dont have a top quite yet.. if you were to take a tape measure and put on the...
so Im pecking away at this rebuild and its several weeks between fiddle-with sessions as life/wife/work seems to constantly get in the way....
working on a CJ2A : want back lit gauges want a voltmeter anybody got any suggestions?
ok, building a CJ2a for the Mtns of NC and (gasp) Im going so far to appease the wife that Im putting in a REAL heater AND heated seats. But...
anybody got good advice to sourcing plugs and wires for a 225 oddfire with a 'stock' GM HEI conversion. the skylark donor style? -thx Chuck
is there a definitive procedure for the startup of a 225 after a fresh rebuild? bought this motor in a basket, and theres ZERO to start from....
so wheres everybody routing their exhaust out so it doesnt get sucked into the cab if doors, rear flap are open. Im getting ready to route an...
so Im putting a dauntless in a 2A frame so I have to build the frame side mounts. So to keep things simple, Im utilizing stock motor based...
so Ive read and re-read the PS pump/bracket threads. why is nobody making their own brackets to get around all of these issues? I dont like the...
so Ive got two intake manifolds to choose from. One has a port passengers side rear. otherwise theyre the same. whats the difference between them?
putting a 225 back together- purchased as a box-o-parts. couldnt find the fuel pump eccentric, nor the fuel pump. guessing that they were...
so its time to order the engine rebuild kit for my dauntless oddfire 225. the only kit that I can find is for a 64 to 71 buick 225. this is the...
Got a '69 225 purchased disassembled. Bores/journals look amazing and stock sizes. So Im not going to do anything but have it honed and...
is there a market for the original seat springs and pans for a flatty? I came across some in a trade and theres a front pan, a front spring set...
so Im process of swapping in 350tbi motor in my '53 3A. the PO had a 307 in it and its days were done, and I got tired of walking around the 350...
So guys, Im looking at a 'Herms power steering' style, ford reverse-throw power steering box upgrade in my CJ3A. trick is I cant quite figure out...
Separate names with a comma.