Does anyone know where to find 1 or 2 inch lift blocks that will fit a 1-3/4" wide leaf spring? I can't seem to find any that narrow..
I did have the brakes disassembled. I have checked and double checked the adjustment to be sure they aren't too loose. At one point they were...
The M/C is about 3 years old. It didn't run dry when the axle was out. I tried a second brand new master cylinder and got the same results
I'm having a weird brake issue with my Jeep. It has 11" Ford Bronco brakes on all 4 corners and has Herm's dual master cylinder conversion. The...
Idk...I think it looks ok on my '55 [IMG]
Don't be scared [IMG] For whatever reason, it seems that many of these old Jeeps are lacking enough positive caster in the front end. Low...
I put my backup lights on a toggle switch.. It can be kinda handy sometimes to be able to just turn them on.
The power lock just looks like a solid cylinder in the area where the spider gears are. What issue are you having?
I miswired headlights a long while back. I reversed the ground and low beam terminals. The lights were extremely dim. The high beams were like low...
I wonder if the tcase drive gear fell off the tranny output shaft...
Well, like was mentioned, lock in the front hubs, put it in 4wd and see if it moves. Give us more details on the rig... tranny, tcase, axles,...
Were there any other symptoms or did anything seem at all strange before this happened?
Not really a project, but like any old vehicle always seems to need something.. My summertime daily driver '48 International KB-1. It was...
You checked to make sure the tcase didn't pop into neutral?
So I shouldn't be doing this then? [IMG]
If it really does have low mileage, just run it! Or at least get it running and try driving it first. You may find that it needs nothing more...
What are you really hoping to gain by doing this swap?
Cool. I was trying to rule out a wiped bearing for you, but you already got that part figured out fb
Where is the sound coming from? Up in the valve cover area or down low on the block? How's the oil pressure?
31"x10.50's should fit, but if you don't want to go quite that big 30"x9.50" might be a better option
Separate names with a comma.