1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Search Results

Search Again
Page 1 of 8
  1. J Michael
    Post

    Who Is Proud Of Their Rollcage?

    Trickpatrick, I really like your roll cage. It's the first cage for a long jeep I've seen that I like. I would like to try something like yours on...
    Post by: J Michael, Oct 30, 2011 in forum: Builds and Fabricators Forum
  2. J Michael
    Post

    Flat Towing

    I suspect the problem with the wheels might be the shackles. Most likely the shackles have canceled the positive caster and caster is what makes...
    Post by: J Michael, Oct 16, 2011 in forum: Early CJ5 and CJ6 Tech
  3. J Michael
    Post

    rear vs front sway br

    Actually it is the opposite, if you were to remove the front sway bar and add it to the rear, you would have a vehicle that would be very loose...
    Post by: J Michael, Oct 13, 2011 in forum: Intermediate CJ-5/6/7/8
  4. J Michael
    Post

    Correct flex plate for my 231 V6?

    The flexplate I ordered from Rockauto arrived and it fits, all the holes line up with the holes on the 231's crank. I counted the teeth and there...
    Post by: J Michael, Oct 7, 2011 in forum: Early CJ5 and CJ6 Tech
  5. J Michael
    Post

    Chenowth Sand Toy Project

    Here's the Motobuggy with the full dirt wheels and shocks. [IMG]
    Post by: J Michael, Oct 1, 2011 in forum: Builds and Fabricators Forum
  6. J Michael
    Post

    Chenowth Sand Toy Project

    We are building these rigs for racing and/or pleasure. They will use a Honda TRX 700 XX quad motor and suspension. [IMG] [IMG] [IMG] The top...
    Post by: J Michael, Sep 30, 2011 in forum: Builds and Fabricators Forum
  7. J Michael
    Post

    Correct flex plate for my 231 V6?

    The part # was 16913.08. I ordered for a 71 jeep commando 3.7 L (225 cid) thinking it would be close to what I have. Now that I have actually...
    Post by: J Michael, Sep 30, 2011 in forum: Early CJ5 and CJ6 Tech
  8. J Michael
    Post

    Correct flex plate for my 231 V6?

    Thanks all for the help. My block casting number is 1249432, which translates to a 1975-1976 block and it is an odd fire. So now I need to look up...
    Post by: J Michael, Sep 30, 2011 in forum: Early CJ5 and CJ6 Tech
  9. J Michael
    Post

    Correct flex plate for my 231 V6?

    I've taken some pictures of my flexplate and the crankshaft end. The crankshaft end pictures are not very good, but hopefully someone can tell...
    Post by: J Michael, Sep 30, 2011 in forum: Early CJ5 and CJ6 Tech
  10. J Michael
    Post

    Correct flex plate for my 231 V6?

    Both flexplate to not align with all the holes in the crankshaft end. I'm wondering if maybe my motor is not what I was told. Is it possible it is...
    Post by: J Michael, Sep 30, 2011 in forum: Early CJ5 and CJ6 Tech
  11. J Michael
    Post

    Correct flex plate for my 231 V6?

    Well, the flexplate I ordered from Rock Auto came today and it is the same as the one I had, 168 teeth.
    Post by: J Michael, Sep 30, 2011 in forum: Early CJ5 and CJ6 Tech
  12. J Michael
    Post

    Building my 1960 CJ6

    More news today about my build, the transfercase adaptor from Advanced Adaptors arrived today. Looks like everything I ordered came in except for...
    Post by: J Michael, Sep 30, 2011 in forum: Builds and Fabricators Forum
  13. J Michael
    Post

    Building my 1960 CJ6

    Tonight I installed the YJ's master brake cylinder with the power boost and hanging brake pedal. The master cylinder was never disconnected from...
    Post by: J Michael, Sep 29, 2011 in forum: Builds and Fabricators Forum
  14. J Michael
    Post

    Building my 1960 CJ6

    Just a little update, I ordered an adaptor for the transmission/transfercase from Advanced Adaptors yesterday. I also ordered the engine mounts...
    Post by: J Michael, Sep 27, 2011 in forum: Builds and Fabricators Forum
  15. J Michael
    Post

    68 CJ5 buick 225 oddfire V6 not firing on cylinders 2,4,6

    I suggest you perform a compression test. If you tried to start this motor on bad gas (I know from experience), it is possible you might have some...
    Post by: J Michael, Sep 25, 2011 in forum: Early CJ5 and CJ6 Tech
  16. J Michael
    Post

    Correct flex plate for my 231 V6?

    I just ordered what I hope is the correct flexplate for my 231 v6. I ordered a flexplate for a Jeep comando fitted with a 225 v6 and th400...
    Post by: J Michael, Sep 24, 2011 in forum: Early CJ5 and CJ6 Tech
  17. J Michael
    Post

    Correct flex plate for my 231 V6?

    Thanks Daryl, I am using a YJ frame and I like the idea of the rest of the drivetrain to be YJ for suspension upgrades and so forth.
    Post by: J Michael, Sep 23, 2011 in forum: Early CJ5 and CJ6 Tech
  18. J Michael
    Post

    Correct flex plate for my 231 V6?

    I really need some help on this. I dont' want to invest in the Advanced Adaptor's stuff if I can't marry the transmission to my engine.
    Post by: J Michael, Sep 23, 2011 in forum: Early CJ5 and CJ6 Tech
  19. J Michael
    Thread

    Correct flex plate for my 231 V6?

    I have a Buick 231 odd fire V6 and TH400 that came with a jeep I no longer have. I want to install it in my CJ6 project. The flex plate that was...
    Thread by: J Michael, Sep 22, 2011, 19 replies, in forum: Early CJ5 and CJ6 Tech
  20. J Michael
    Post

    "Therapy" Progress Report With Pics

    That's cool. I will probably have to build a power steering bracket for my V6, I'll keep your idea in mind.
    Post by: J Michael, Sep 15, 2011 in forum: Builds and Fabricators Forum
Showing results 1 to 20 of 149 Next >
Search Again
Page 1 of 8
New Posts