Sorry but I have to say it. The floor of 57cj5's Jeep is nicer then anything on mine, well done sir. I junked the factory heater in mine and will...
Thanks Ken, it was my first cage built from scratch, there was a lot of head scratching but I'm pretty happy with how it turned out. davistroy, I...
I guess I let this thread go dry, but really most of the work hasn't even been picture worthy until lately. I have been smoothing over the body...
There is no reason for your wheels not to work. What is missing out of this story? What offset are you running?
Looks like the number to Specialty Auto Parts USA (Proform) is (586)774-2500.
I have a new BBD carb sitting on the shelf, it was only used for smog testing when the PO had the Jeep in California. Just start with the basics...
What are the specs? Year, estimated miles, carb, timing setting? Spray some carb cleaner around the vacuum lines while its running to see if the...
I know two Jeeps running Toyota axles with YJ springs both outboard front hangers and under frame rear. Both drive and wheel just fine, there...
Hey thanks. I didn't know they have been making this bender for so long. Mine came with a simple instruction book and I also bought the Bend Tech...
I now have the cage almost complete, just need a few gussets and weld it all together. Things would go faster if life didn't get in the way. It...
My original roll bar went all the way to the floor.
I worked on the cage this weekend things did not go smooth. My Bend Tech program came up with some goofy numbers that did not work out then my...
I cant remember for sure but I think you use the gear from a 304. I researched this at one time before just ordering an HEI from 4Wheel Parts for...
That is the primer you are seeing, its just color matched. Doing the primer this way provides an even color under the paint and with some colors...
I have a Pro Tools 105 bender backed with the Bend Tech EZ cad program and Velspare primer with a couple shots of my final color choice. I don't...
That is 1.25 .120 wall tubing with the skins done in 10g. I built them like most tube fenders are done then used the factory inner fender and...
I guess I could update this. I haven't done alot that is noticeable, mostly working out dings, filling, and sanding. I Built some new fenders then...
Thank you. Any guys with more AMC experience have any idea's about the oil pressure ussue? I usually just throw a Chevy in the them but I am...
Engine is out to find an oil pressure issue. Last year I lost half my PSI and am not sure why. the engine has less then 10,000 miles, I master...
Time to update my progress. I just spent the last week cleaning and painting the under side along with the new YJ 2.5'' lift, shackle reversal,...
Separate names with a comma.