Mobile AL. https://www.facebook.com/marketplace/item/3382268002028403/?mibextid=6ojiHh
Finishing up my TC rebuild. Installed front driveshaft with new (proper) yoke on the D30. Lube in the transmission, TC and topped off both difs....
Or do you do this every winter?
Just about done with the TC rebuild. Thanks Nickmil for the shims. [img] I did to at least every other one. We’ll see.
Just about done with the TC rebuild. Thanks Nickmil for the shims. [img] So glad I wasn’t doing this under the Jeep. I thought I had it...
Correct. I'm searching Quadratec and 4wd but not finding it. edit- found them! Thanks for the help.
Finishing up the rebuild of my TC. One of the old nuts was buggered up badly. I had a spare steel locking nut that I put on the rear. Seems like...
Someday your going to show us this project?
Me to.
Almost 1200SqFt of ceramic tile in one of our stores. I’m to old for this but the flooring guy wanted $8000. [img] Tuesday night we’ll be here...
I’ll bet Boston Bob or dnb5853 (David) would have space for it.
Nick. I’ll send you a message with my address. Need 2-4 of the thicker ones.
That’s not good but probably ok for me as I have several thickness shims in there already.
I’m not sure. It’s definitely too tight. Had to tell until I started putting them in and checking the endplay.
I’m rebuilding the TC and the old shim pack isn’t quite enough. If someone has a few spares around I’ll gladly give a couple bucks. The shims are...
Is the photo your cover? It looks pretty good from here.
It is spring loaded. It was scavenged from a hitch mounted luggage rack.
I built a latch that holds the tire carrier open. A couple metal tabs one welded to the carrier and one to the bumper. [IMG] I bent a ramp...
It’s only ordered. Should have everything here by Christmas
Nice work
Separate names with a comma.