Don't mean to hijack, but is such a cable available for my 3B? It pulls oil up to the speedo.
Had a liittle issue with my cj6 this eve comin home from work. It was missing a little. Pulled the cap,(HEI), when I got home and found the...
I've seen it in person. It is a really nice Wagoneer!(y)
I think I used this one in both the cj5 and the cj6. 40,000BTU is a lot of heat and I'm a cold weather wimp.
Summit Racing SUM-991106 Summit...
It really is pretty easy. I found a small LED light, I think Amazon, that fit right in the factory hole in the bumper.
Its actually on...
Thats a bomb with a short fuse
Could have been a major event!
Glad it turned out that way.
I intend to do just that when I get the tcase out of the green B.
Been workin on the mock up for the T18 swap for the 3B
the bell housing I had available had a hole that was questionable, so all 4 of them...
I have never heard of that. I might just try that myself
I really like this method. Looks substantial and neat/clean at the same time.
As the Novak parts start to show up, I'm tearing down the T18.
The 1st pic is the empty case. Look at all that metal gunk in the bottom!:(...
I got a friend whose looking for a cj2a steering shaft or worm gear. I think his would be the early type.
Anybody got one in decent shape that...
I'm reading and watching here. I also have a Ford T18 on the workbench waiting on Novak parts, to swap out the T15.:waiting:
Thanks. I''ll probably move forward on this. Just wanted to use all the experience thats available here.
This is a great forum. Thanks All (y)
Still working on this.
I'm still using stock floor pedals, with the AA chain linkage setup on my 3B. Has anyone used this setup with the Ford...
If you are taking orders, I would like one just like the top one, with the newer T18 pattern w/OD & twin stick.
What is the cfm rating on the fan that you are using? Small fans that only 12-1500 cfm are not enough.
Separate names with a comma.