Just got a valve job done on my F-head engine and one of the valve spring retainers is cracked. The machine shop welded the crack and did a good...
The F 134 in my 67 was running strong. It smoked a little on crank up, but cleared after warming so I figured the seals were going south. A while...
I have a decent hood, and a dash panel that hasn't been butchered. The only hole in the dash that isn't stock is a hole for a cigarette lighter....
I have pulled the heads off of probably hundreds of engines, but nothing I try will get the head to break free on the F134 in my CJ5. Yes, I am...
Tellico Plains is about 60 miles from me. This looks like a nice Jeep....
Oil bath air cleaner, has a dent in top which could easily be straightened, otherwise in fine shape. - $70 Heater control out of 67 CJ5, nice...
Reproduction distributor for L-134 or F-134 This came with some other parts I acquired. It appears to be new. It is the same as what is sold by...
I acquired a complete drivetrain last week which has a fairly new ATV (Saturn) overdrive. This is a rear shift version, and this one is supposed...
I have a set of axles from a 1967 CJ5 Standard Jeep I have been parting out. Springs are still attached. I can deliver these to the Willys Fall...
I acquired some parts I have no need for in a deal I made today. Most of these came out of a recently restored 1950 4WD Willys Pickup with the...
I am reassembling a Warn Overdrive after cleaning it and replacing some bearings. In case it matters it is an older Warn front shift unit with...
Long shot, but always worth a try. I am rebuilding an old Warn front shift overdrive. It came to me missing the oil scoop, and shifter. Figured...
I have a Warn Overdrive on the way with a broken tooth on the bowl gear / planetary housing. I know some have converted to lower gearing in their...
On the Kaiser Supersonic, some wagons, and early trucks they used the Carter YF instead of the WO. These are the manifolds with the studs...
I posted a list of items in the ECJ5 classified thread. Some of the stuff is for later model Jeeps, all of it is new old stock parts from a 4X4...
I have updated the list to remove items sold, and reduce prices on what is left. Some members apparently have a different interpretation of what...
Set of decent headlight buckets, with bezels, and headlight retainer rings. Set of parking / turn lights. The parking lights have decent bases...
I have a nice 67 CJ5 rolling chassis, straight and solid. Condition of axles unknown, but they are there. Steering has some slop in it, springs...
I have a L134 which came to me partially torn down. The rear main bearing cap had been removed and was in the oil pan along with a lot of other...
Small parts from CJ2A Set of hood latches $10 - SOLD Set of windshield clamps $25 - SOLD For some reason I can't upload pictures, but if you...
Separate names with a comma.