because of the lack of offgassing I’ve also considered putting it under the passenger seat seeing as there’s plenty of room. I just don’t know if...
Most options are limited by my inability to weld! That bracket looks great though, thank you for sharing.
I made that plate, and I have a lot more 1/4" aluminum plate that can probably cover that whole side. Thanks for the ideas! I will have to look...
Here's what I have for room in the engine bay.[ATTACH] [ATTACH]
The heater is up pretty high, and only has an inlet/outlet for the coolant so something lower could work as long as it doesnt interfere with the...
Is anyone running a non-standard battery in their CJ5? We've come to the point in our project where we need to figure out the battery tray. Cant...
I bought a new one from Jeepzzzz@aol.com. When I bought it two years ago it was $37.99 plus $15.00 shipping. just a flat plate cut into a fancy...
Sending you a PM
Stainless windshield knobs sold & removed Make an offer on anything!
Added some 1/4 rubber under the body mounts to help with any little vibrations. With the increased body height we have to bend the clutch & brake...
Mine leans to the drivers side as most do I believe. We flipped the springs from side to side and it seems to have helped a little bit. Ours was...
Got the drag link installed, no longer hitting the bell housing! had to finesse the exhaust a little bit but all is well now. I was driving myself...
Drag link should be here this week. Hopefully it helps clearance a little bit. Test fit the windshield so we could drill the hinge holes and put...
No dice on the drag link flip, it doesn't bend in correct orientation and hits the exhaust pipe.
Thanks, Im going to make a WTB ad cause I cant find one online.
Thank you for confirming Matt!
No rush, whenever you get around to it. thanks!
Separate names with a comma.