Head is together and painted. Ended up using caterpiller valve stem seals. Resized the connecting rods. I called and spoke to a guy about a custom...
4 angle valve job, cut the guides for a positive seal, opened up the intake passage an obscene amount, and ground down ~.130" :sneak: [IMG] I...
Noooo! :lol: An LS would be a good candidate but I'd rather just build another Jeep. This 3b is pretty much based around the Fhead and putting a...
Got some things done to the engine and all the parts except the camshaft have been ordered. I cleaned up the exhaust side of the block some. Still...
F134 is coming together finally. I polished the crank std/std, bored it .030, got the pistons and rings today so I'll hone it to final size. The...
Added some bling to the D60. [IMG] [IMG] Ahh, steering. I knew this was going to be one of the less enjoyable things I had to redo. Trying to...
Definitely plan to keep the fhead for the foreseeable future. I scored a set of 12 bolt hmmwv wheels with bfg Baja tires yesterday so now I can...
I managed to do the whole rear suspension (minus shocks) and tweak some things on the front today so it's finally a roller. Nothing has changed....
I don't mind a spool in the rear but the downside is the rear pushes the front around on soft terrain like mud.... most noticeable on tight turns....
My 3b had the fenders welded to the grill and the grill mounts.
It was good to meet you and see your Jeep project.
In case you didn't see the pm I'm in Clinton for the weekend. About an hour from forest.
PM sent
Biloxi is a short trip from your place. Grab the D44 while you're at it. EEBrakes and all still attached to it. If you need an sm465 I have one of...
If you plan to add Saginaw steering I have a 4 bolt gear at the house.
I lost interest in this for awhile but I got the front end done and working on the rear. I had to put a transmission in the jk and rebuild the 241...
You could try this seal. Fel Pro SS70037
I tried to get him to build a 429 or 460 but he just had to have the 400. Imo, a big block would've been better money spent.
400M I'm building for a guy. It's going in a 79 F250 and the guy plans to drive it to his wedding in 6(?) weeks. I did all the machine work and...
Some of the puzzle..... I'd rather have an sm420 but this junk was in the garage already. Still might get an sm420 if I can find one... [IMG]
Separate names with a comma.