Next time I have the T90 out I'll be putting in a sealed bearing and 1 1/2 felt seals. Should have remembered about this but I haven't worked on a...
After going down hills I've noticed 90w coming from the weep hole in the bell housing, must be coming out of the front bearing retainer set up....
That's what I was going for with this build, a mostly stock CJ2A.
Just got this one 99% done. [ATTACH]
Just wondering how to install it. I had the transmission out and put it back in without the fork. I put the fork back in thru the inspection hole...
Just put one in and used this type https://walcks4wd.com/Oil-Gauge-Hard-Line-MB-GPW-CJ2A-CJ3A_p_1460.html
Just spent 2 hours swearing trying to put the fork in thru the inspection hole in the bell housing. Is there an easier way?
I use LUK usually.
Found the thread, guess I'll try the roller method.
Saw them, didn't want to pay $40 for four. Says you can only use them once.
What's a good way to paint these? Also does any place offer the decals anymore?
This. Pulled the transmission and clutch assembly. The clutch disc (new) measures .310. Got a new pressure plate coming. Did figure out that the...
Just took the inspection cover off. Noticed that the pressure plate doesn't touch the disc until the pedal is all the way out. Looks like it's...
Not sure, it is 3 finger design. May try to adjust it in place give the bolts the same turns, if its possible thru the inspection plate.
Yes, put in a new one. Going to pull the inspection plate when I get a chance.
Could it be a weak pressure plate ? It's a stock set up L134/ T90. Were there different TO bearings? The disc seemed identical to the old one....
Been working on a 2A. New clutch disc and TO bearing. Pressure plate seemed ok so I used it. Now the problem, clutch won't engage until the pedal...
I have some original Jeepster mirrors
https://www.ebay.com/itm/125391540846?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D9ba92251ee...
Got the toe in set at an 1/8 and put 2* shims in and what a difference. Down a curvy road at 55 one hand on the wheel. Made me decide not to sell...
Separate names with a comma.