Mornin Boys.. I'll chime in here.. I once had a 75 CJ w/304. Mine was doing pretty much the same thing. It'd even die on small hills. After...
It's a kinda lion thing. Squeeze his hand he plays I've got a feeling. Was gonna toss it in the rubbish but hey let's put it on the heap!
[IMG] [IMG]
I may be gone but haven't forgotten this site. I have referred a few people this way. Life goes on. Having a newer Jeep does not lessen the...
My water pump took a dump last summer. I replaced it with a high flow version. I wouldn't bother trying to rebuild one
Lose the Crocs..
Same ones I installed in my 75 CJ. Yes they are not quite the same as OEM. I all ready had the notch, but I had to modify my seat frame.
No. They originally run underneath. My 75 had em on both sides there. Tore the muffler off twice. Took it to a muffler shop and had em ran...
Mine go "tinka-tinka"
I made front and rear in my garage. 2X4 tubing 5/16". Box ends.. Easy peasy
On my 75 CJ there is a turn limiting bolt. Maybe yours is missing or needs adjustment.
Here's my take. I have 2 Stihl saws that never fail to start and run. Even after sitting for an extended time. First the oil I use has a fuel...
Some folks have zero fabrication skills. Looks like you found at least one of those guys.. Fugly... I built bumpers for my CJ front and rear,...
I have always said. Own a Jeep? Buy a welder.
They aren't he only one . Hamilton does the same as well as Affordable TBI. My unit from Affordable uses GM parts if needed. IMO Hamilton has...
Here's what I know, or think I know. I wanted to put 35's on my75 CJ5. I researched it. Seems that 35's are too tall for narrow tracks. I lifted...
Not yet. But I will
Actually mine has a bit more. It's looser so it seems.
I would rework that area and clean it up. Maybe buy a new spring hanger too. Then I would put a few gussets in there.
What year Jeep and model? I installed OME 2-1/2" YJ springs on my 75. While it did ride better it still isn't like a coil over.
Separate names with a comma.