Just another bit of advice for your install. lube the throwout bearing before insalling. I've had to replace 2 because of the bearings wearing...
[ATTACH]Last year doing the Nevada Backs Roads Discovery Route
Like having a loaf of bread at the park......the squirrels and pigeons will be flocking....lol
pm sent
Hoping to get lucky!!! I just missed out on the last set I saw for sale. So if anyone is looking to rid themselves of these items....I'd love to...
As mentioned a few times....if you can afford it, get one in each drive so you can cover the wide range of torques that you will need. A...
I had a 2" fuel gauge on the left side of the wheel that I no longer needed. I removed the glass, painted it black and reinstalled it. It blends...
What kind of extras could there be to jack the price that high?
remove, wire brush, clean threads, re-gap, and re-install, unless they appear off.
someone would actually drive this around? DAMNNNNNN.......
parts for older vehicles aren't made like they used to. lower quality material, weak quality assurance, quantity over quality. Sometimes you have...
I know from my personal experience that adjusting the float arm does work for setting the "empty" point on the gauge. Just as the OP stated...mine...
It will still boil down to adjusting the float arm if you want to adjust for "E". I'm sure these units are adjusted for "in the ballpark" from the...
If it does end up being the throw out bearing, make sure it is well lubed. I've had to replace mine twice in the last 3 years due to dry bearings....
i have the same issue. I call it the "60 mile tank". It would sit at full for 60 miles or so, then drop like a rock until it hit "E", then it...
any standard clip from a tow hitch pin wil work....6 years and going strong
This is an idea I was was floating also. not sure about the attachment to the roll bar yet.
I try to be lenient when it comes to custom vehicles,...but.....as mentioned, the rear fenders, extra wide axles, wheel size, and for me...the...
i had the same issue, only with my v6. i remedied the problem by installing a fuel pump with the return line to the tank. PO had the wrong one. i...
i use a nalgene bottle with the hose coming in from the bottom, and have it mounted to the right side of the radiator. The generic ones from the...
Separate names with a comma.