so going through my fitting collection the only one that fits this thing is a flare fitting nut from my 57 land rover.
[ATTACH]
[ATTACH] so it is not a 37 degree fitting
Thank! I saw that one, but I am using an M38 gauge panel that pulls off the dash and i was hoping to use a flex hose there to be able to pull the...
I am going to start installing my gauges for the flatty. This is a repop Omix gauge. Is the fitting on the back of the gauge an AN fitting? If...
Still available.
I wish you popped up a few months ago. i have my 225 all buttoned up now. You are dang close to me
[ATTACH] good eye. here is the numbers
I could not locate any numbers on it. Here are pictures of the under cap if that can help you [ATTACH]
[ATTACH] I have two distributers available. Buick 225 V6 Delco Distributer Complete and good condition. $120. (SOLD) Buick 225 V6 Presolite...
I have the front dump driver side manifold. Heat riser moves nicely. $60 plus the ride
There are SPEN part numbers for a leather seal. I did actually order one and it did not fit. The current disc did look like it was a 2 piece, but...
Working on my SPEN trailer. I want to repack the bearings but I am trying to find an oil seal for it. Finding the correct seal has been a...
I was thinknig the same thing. I know the regular scout with that nissan diesel is slow. This thing would be a turtle.
I finished up the tailgate. chains were put on. [img] [img] [img] Next on the list is to do a few more spots of rust repair then primer and...
The wiring was a plug and play affair. My friend purchased a plug and play harness for the Jeep. It was nice to jsut plug things in from the fuel...
I have had this Scrambler project in the shop for a month or so now. I wonder why I cant get my Flatfender up and running. :( A friend of mine...
Todays progress. Got the tailgate welded together Mockup [img] Welded the tubes and the brackets on the body were drilled and mounted. [img]...
Separate names with a comma.