Can anyone tell me the height, from the floorboard to the bottom of the seat frame (front of the seat} on an M-38?
I have a civilianized M-38 and want to install aftermarket bucket style seats in the front. Has anyone found an aftermarket bucket style seat...
FWIW, I removed mine. Plenty of room under the hood for a battery, IMHO.
What is the fuel line diameter on a CJ3a or M-38?
Do I need to use teflon tape when screwing brass fuel fittings into fuel pump and carburetor??
Okay, so if I want to order some wheels then I want to order 5 x 5.5 bolt pattern?
What is the wheel bolt pattern on a CJ3a? Is it 4.5 x 5??? Stupid question, I know.
If a guy ties into the frame, are there any techniques for welding to the frame to avoid weakening it? That concerns me a bit. The other problem...
What are those?/
What length column are you guys liking???
Well, I am leaving my angle stock, using a tilt column. But damn, I think the column is a tad long. Its 28" and i have to stick it up pretty...
You guys who have done a Saginaw conversion in a vintage flat fender, are you changing the steering column angle at all? I have a tilt column,...
Thanks everyone for the input.
Thanks for the help guys.
Must roll cage be bolted to the frame in order to protect in a roll-over? I am going to build a cage for my civilianized M-38. I'll have...
How are you guys booting your twin sticks coming through the floor? I've got an aftermarket boot with the hold down ring, but its not gonna work...
Not yet. Debating whether to install one. Kind of like the traditional look, but then again I'm too young to die.
Never mind guys. I found some useful photos on the web. I'm good to go.
Can anyone provide me photos of their Saginaw conversion for a CJ2a, CJ3a, or M-38? Specifically, I need a photo of the steering column coming...
Are you guys putting seat belts in your old flat fenders?? If so, any tips or tricks on what to use and installation?
Separate names with a comma.