I have decided to start something else, since I am waiting for a set9 bearing for the AMC rear axle. I cleaned and set the garage up for work on...
Well, ..... I was going to post up a pic of the hard top I have. but Beamingpix is having issues. But I have this type of hard top off of a 65...
I too, am unable to see things on FB. I used to be able, but something has recently changed.
Ha! Great minds think alike!!!
Even if the pto outputs are locked together, just disengage the front winch drum to use the rear box.
I'm running 31's 15 - 20 on road 10 off.
You can't unsee that :poo:
Sorry for the confusion, there is currently a D44 W/3.73 gears in my Jeep. I lost another wheel bearing in my M20 on my last trip and bought a D44...
Well I got the M20 torn down. I think the True Trac is OK enough. But the differential bearings are shot. 300K+ will do that. Flushed and cleaned,...
one of those zero's has to go
Pretty much finished working on the trailer, so I decided to tear into the M20 axle that I have replaced 3 driver rear axle bearings and shafts....
I just used a piece of PVC. Works well for me. [IMG]
:watch: Can't wait
i bought mine from J.C.Whitney in the 90's just before they stopped carrying them. About 6 month later I tried to get one for my son's Jeep and...
This was the optional addition to that bar. i.e. the bull bar [IMG]
Ever since I saw the Boss Vplow for Jeeps, I have wanted one. [MEDIA]
Good Luck, I tried to get info on my PTO, but was unsuccessful. I look forward to the build. :watch:
I am , here is the link http://www.earlycj5.com/xf_cj5/index.php?threads/120877/ all of the pic's are on page 2, do to photobucket's debacle
Can't see pix's
early CJ5 axles, 50 thru 65 or later they bolted right in. The trailer were designed as the same time so parts are interchangeable.
Separate names with a comma.